NV FS: Work VS-XX Race Gold 19x8.5/9.5 with Yokohama Tires
06-29-09, 01:28 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2009
Location: NV
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
FS: Work VS-XX Race Gold 19x8.5/9.5 with Yokohama Tires
WHEELS HAVE BEEN SOLD!!! Thanks for all the interest!!! 
---------------------
I know i have a low post count here, but please understand that i'm fairly prevalent on the Audizine forum and have purchased and sold many things through that forum under the same user name with nary a negative remark. I'm also friends with Ay-Nako, so hopefully he can chime in soon to vouch for me. Thanks for looking!
---------------------------
I picked these up with every intention of putting them on my A4, but due to my BBK, i can't run a wobble bolt setup without completely redrilling the wheels and running spacers. Thus, I have to let these go...
Up for sale are a set of staggered Work VS-XX's with a race gold face and Polished lip. Below are the specs:
F: Work VS-XX 19x8.5 et. 31 (2" lip) wrapped in Yokohama S.Drive 245/35/19 -- 80% tread left
R: Work VS-XX 19x9.5 et. 45 (3" lip) wrapped in Yokohama S.Drive 275/30/19 -- 80% tread left
Bolt pattern is a 5x114.3 and the center bore is 71.75mm.
--these came off a 2GS3, so the fitment is spot on for a Lexus.
The bad:
There is a 1.5" scuff on one of the rear wheels that can be polished out. There are minor scratches on them from the previous owner's wear and tear, but otherwise look phenomenal.
Price is $2,300 shipped via Paypal, or $2,100 CASH picked up. Please no low-balling.
I prefer a local deal, but will ship at the expense stated above. I would rather not "deliver" these to socal since i've run into previous flakes that have left me hanging and wasted my time; so I've left the options to either pickup or shipping
pics of the rash:
The wheel in question:
a closeup of the rash - it's about 1.5" long
also a link to my original Audizine ad:
http://www.audizine.com/classifieds/...t=15330&cat=48
contact me via email at yoogene83 at gmail dot com for a quicker response. Thanks!
---------------------
I know i have a low post count here, but please understand that i'm fairly prevalent on the Audizine forum and have purchased and sold many things through that forum under the same user name with nary a negative remark. I'm also friends with Ay-Nako, so hopefully he can chime in soon to vouch for me. Thanks for looking!
---------------------------
I picked these up with every intention of putting them on my A4, but due to my BBK, i can't run a wobble bolt setup without completely redrilling the wheels and running spacers. Thus, I have to let these go...
Up for sale are a set of staggered Work VS-XX's with a race gold face and Polished lip. Below are the specs:
F: Work VS-XX 19x8.5 et. 31 (2" lip) wrapped in Yokohama S.Drive 245/35/19 -- 80% tread left
R: Work VS-XX 19x9.5 et. 45 (3" lip) wrapped in Yokohama S.Drive 275/30/19 -- 80% tread left
Bolt pattern is a 5x114.3 and the center bore is 71.75mm.
--these came off a 2GS3, so the fitment is spot on for a Lexus.
The bad:
There is a 1.5" scuff on one of the rear wheels that can be polished out. There are minor scratches on them from the previous owner's wear and tear, but otherwise look phenomenal.
Price is $2,300 shipped via Paypal, or $2,100 CASH picked up. Please no low-balling.
I prefer a local deal, but will ship at the expense stated above. I would rather not "deliver" these to socal since i've run into previous flakes that have left me hanging and wasted my time; so I've left the options to either pickup or shipping
pics of the rash:
The wheel in question:
a closeup of the rash - it's about 1.5" long
also a link to my original Audizine ad:
http://www.audizine.com/classifieds/...t=15330&cat=48
contact me via email at yoogene83 at gmail dot com for a quicker response. Thanks!
Last edited by yoogene83; 07-08-09 at 01:15 PM.
07-02-09, 05:05 AM
#2
Forum Administrator
iTrader: (2)
Vouch received from Ay-nako.
Please note on post if these wheels are Lexus fittment (both bolt pattern and center bore)
Please note on post if these wheels are Lexus fittment (both bolt pattern and center bore)
07-02-09, 08:48 AM
#5
Driver School Candidate
Thread Starter
Join Date: Jun 2009
Location: NV
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
The wheels will fit a lexus since they came off a second gen GS. The center bore on the wheel is sufficient to fit the Lexus 60.1mm hub, so you will be good to go as long as you torque the lug's down properly.
Trending Topics
07-02-09, 11:22 AM
#9
Thanks! And yea, i've had a lot of flakes and lots of low-ballers; the one time i tried to actually be nice and deliver them the guy flaked and pissed me off royally; my fault for not guarantee'ing a deposit or payment prior to doing so though.
The wheels will fit a lexus since they came off a second gen GS. The center bore on the wheel is sufficient to fit the Lexus 60.1mm hub, so you will be good to go as long as you torque the lug's down properly.
The wheels will fit a lexus since they came off a second gen GS. The center bore on the wheel is sufficient to fit the Lexus 60.1mm hub, so you will be good to go as long as you torque the lug's down properly.
dam it haha if u woulda met me half way few months back i had the cash ready but instead i picked these wheel up from a friend locally (in the sig) ... in doubt great guy, he has reponded to every question and gave me answers i was lookin for but i couldnt do it...
i didnt have time to drive out to vegas or else these woulda been my.. GL bro
07-05-09, 12:43 PM
#14
Driver School Candidate
Thread Starter
Join Date: Jun 2009
Location: NV
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
