FS: Auto Couture Supreme 20" Chrome Staggered 3-pc NICE!
#1
Advanced
Thread Starter
FS: Auto Couture Supreme 20" Chrome Staggered 3-pc PRICE DROP! $1100
I'm selling my chrome 20" Auto Couture Supremes. Specs are:
Front: 20x8.5" offset 38
Rear: 20x9.5 offset 42
These are very rare wheels! These are the 3-piece rims, not the 2-piece BR model. Chrome is in great shape, some minor curb rash on one of the 9.5" wheels, you can see it in the pictures. There are also two small indentations, each about .5" long in two other rims, not noticeable unless you really look, but the chrome plating is not perforated. One is on the lip, other is by one of the lug holes. There are no bends in any of the rims.
All four wheels appear to have same disk set-up. I think they are medium disk. The front is definitely NOT high-disk, as it will NOT clear BBK. Not sure if the rear is medium or low disk. Lip width is approximately 1.5" all around.
I had these on my 01 LS430. I had to shave the front caliper to get the clearance necessary. If you want to fit them on an LS430, you would either need to shave approximately 3-4mm off the face of the front calipers, or go with some spacers, and/or a combination of the two. A 5mm spacer should make them clear. They should fit a GS with no problem, but since I don't have a GS, I can't verify.
Price: $1100 plus shipping (paypal +3%)
Front: 20x8.5" offset 38
Rear: 20x9.5 offset 42
These are very rare wheels! These are the 3-piece rims, not the 2-piece BR model. Chrome is in great shape, some minor curb rash on one of the 9.5" wheels, you can see it in the pictures. There are also two small indentations, each about .5" long in two other rims, not noticeable unless you really look, but the chrome plating is not perforated. One is on the lip, other is by one of the lug holes. There are no bends in any of the rims.
All four wheels appear to have same disk set-up. I think they are medium disk. The front is definitely NOT high-disk, as it will NOT clear BBK. Not sure if the rear is medium or low disk. Lip width is approximately 1.5" all around.
I had these on my 01 LS430. I had to shave the front caliper to get the clearance necessary. If you want to fit them on an LS430, you would either need to shave approximately 3-4mm off the face of the front calipers, or go with some spacers, and/or a combination of the two. A 5mm spacer should make them clear. They should fit a GS with no problem, but since I don't have a GS, I can't verify.
Price: $1100 plus shipping (paypal +3%)
Last edited by jpcdmd; 01-06-08 at 12:04 PM. Reason: price change
Trending Topics
#13
I actually just bought a set of these YESTERDAY... should be getting to me on Friday... I wish I waited! When I saw them in person I knew I needed some, but they had to wrong bolt pattern, so I had to order them.
$2,000 is a steal of a deal.... should sell very quickly I would think!
$2,000 is a steal of a deal.... should sell very quickly I would think!
#15