FS: Club Linea Barletta 19" staggered w/ nitto 555
03-16-05, 09:07 AM
#19
Pole Position
Thread Starter
flip the face around??? dunno if thats even possible. these wheels are 2piece construction but the disk is welded onto the barrel of the wheel. even if you could the inside is not polished and there is a hump. if you want maximum lip action i suggest you look for Lo-disk type type wheels. some manufacturers refer to Lo/Hi disk by different names
03-16-05, 09:56 AM
#20
Driver
Join Date: Mar 2004
Location: California
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
ic, so its not a bolt on face, thats cool. on a reverse type rim, where the face is bolted to the disk you can flip it around and have a step lip and lower offset, i used to do this with my 240 and i know it can be done, probably not with your set though, anyway, thanks for your time.
03-16-05, 05:11 PM
#21
Pole Position
Join Date: Dec 2004
Location: connecticut
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
do you have a indash tv?
i have a eclipse av5101 flip out monitor with brain unit, all wires, remotes,navi, spereate dvd player, and a 6disc cd changer. The flip out and dvd player fit the double din perfectly in a sc.
let me know, i need some rims for summer
i have a eclipse av5101 flip out monitor with brain unit, all wires, remotes,navi, spereate dvd player, and a 6disc cd changer. The flip out and dvd player fit the double din perfectly in a sc.
let me know, i need some rims for summer
03-21-05, 01:09 AM
#23
Pole Position
Thread Starter
over 1500 views and not a single offer .... except for a lowballer. 
some info: shipping would be approx. $35 per wheel.
a wheel repair shop in OC charges a flat fee for complete wheel repair. i think it was 100per wheel. there are probably other places that will roll out the bends and repolish the lip for a lot less.
dont need a tv in my sc, but i could use a small amp and/or sub that fits in the stock location.
im almost certain these would fit perfectly.
what are the factory wheel specs for your ls?
some info: shipping would be approx. $35 per wheel.
a wheel repair shop in OC charges a flat fee for complete wheel repair. i think it was 100per wheel. there are probably other places that will roll out the bends and repolish the lip for a lot less.
do you have a indash tv?
i have a eclipse av5101 flip out monitor with brain unit, all wires, remotes,navi, spereate dvd player, and a 6disc cd changer. The flip out and dvd player fit the double din perfectly in a sc.
i have a eclipse av5101 flip out monitor with brain unit, all wires, remotes,navi, spereate dvd player, and a 6disc cd changer. The flip out and dvd player fit the double din perfectly in a sc.
would these fit a 94 lexus ls400 is the offsets ok ?
what are the factory wheel specs for your ls?
Last edited by slo86; 03-21-05 at 01:14 AM.
03-28-05, 12:33 PM
#25
Lexus Fanatic
Originally Posted by slo86
over 1500 views and not a single offer .... except for a lowballer.
Man, I had the exact same trouble when selling my wheels. Questions upon questions from people who didn't even have half the money I was asking for my wheels, just time wasters and lowballers. Good luck with the sale man, hopefully you can make it to the Spark Racing meet this weekend and we'll hook up 
