Replace 2 or 4 run flats at a time?
#1
Driver School Candidate
Thread Starter
Join Date: May 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Replace 2 or 4 run flats at a time?
I have a 2009 IS 250 AWD. I have a slow leak in one of the back tires - have received a low tire alert 4 times in the last month and had to put air in the tire.
All 4 tires have about 32K miles on them. Do I need to replace all 4 run flats at the same time or can I just replace 2? If I replace 2, does it matter whether the new ones are put on the front or the back of an AWD vehicle?
Thanks in advance!
All 4 tires have about 32K miles on them. Do I need to replace all 4 run flats at the same time or can I just replace 2? If I replace 2, does it matter whether the new ones are put on the front or the back of an AWD vehicle?
Thanks in advance!
Last edited by psychodog7; 05-19-13 at 10:01 AM. Reason: thanks
#2
Generally on an AWD vehicle you would like the tread depth of the 2 tires you are buying to be within 2/32nds of an inch of the 2 worn tires you are keeping. So with 32K on them, I would assume you are pretty well worn and would most likely need 4 new tires.
Thread
Thread Starter
Forum
Replies
Last Post
goodrx350
RX - 3rd Gen (2010-2015)
31
11-19-15 08:37 PM