rim dimensions
07-02-02, 11:50 PM
#1
Driver School Candidate
Thread Starter
rim dimensions
i hav a 2001 black gs300..i wanted 2 get 20" rims and was wondering what kind of dimensions should i get for the front and the back..i dont have a clue about that and any info would really help..thanks in advance
07-03-02, 03:07 AM
#2
Lexus Fanatic
20" x 8.5" +38 to +45 with a 245/35-20 tire...
If you want to stagger the rear (meaning = have wider wheels in the back since it's a rear wheel drive [RWD] car), you can do a 20" x 9.5" +37 to +45 or even a 20" x 10" +43 or so with a 275/35-20
This will give you a setup where you won't need to roll the fender or do any other type of modifcations...you will rub the INNER fender a little bit but that's due to the oversizing on the tires versus stock...no big deal, it will rub for a little bit then it will eventually stop. Doesn't hurt anything I assure you...
Also, this topic has been covered about 10 ZILLION times so it would help if used the SEARCH function and read some of the past posts.
If you want to stagger the rear (meaning = have wider wheels in the back since it's a rear wheel drive [RWD] car), you can do a 20" x 9.5" +37 to +45 or even a 20" x 10" +43 or so with a 275/35-20
This will give you a setup where you won't need to roll the fender or do any other type of modifcations...you will rub the INNER fender a little bit but that's due to the oversizing on the tires versus stock...no big deal, it will rub for a little bit then it will eventually stop. Doesn't hurt anything I assure you...
Also, this topic has been covered about 10 ZILLION times so it would help if used the SEARCH function and read some of the past posts.
Thread
Thread Starter
Forum
Replies
Last Post