lisalisa

Hi everyone,

i was wondering if anyone could give me some advice and help...im looking to get another set of wheels for my sc430 and its another wald setup..19x8 fronts w/ +38 offset. and for the rears 19x9.5 w/ +43 offset.. the tires are 275 35 19 and 245 40 19..

can anyone give me an idea of what this would like on the sc430? any help would be appreciated...

thanks a million!

SoCalSC4

Those wheels have very conservative offsets for the SC.

In my opinion, the fitment would look terrible. Frankly, I would rather stay stock.

lisalisa

can you explain how it would look? would the wheels sit in or stick out? im sorry im really bad w/ all of these offsets and all..right now i have a set that has the offset of +37 and +38..can you what difference it would make.? what does it mean when the numbers or lower or higher?
sorry if the questions are so dumb...but i get so lost w/ all this..
thanks!

lsvtec

iTrader: (7)

you would need to run some spacers like 10mm front and maybe 20 rear

Sltwtrking

Compared to where your factory wheels and tires sit, the new 19" front set-up will push out 7mm further towards the fender and the new 19" rear set-up will push out 17mm further towards the fender.

IMO this set-up won't look bad (fitment wise) but you may want to consider running tire size 245/35-19 in the front with tire size 275/30-19 in the rear.

EXE.UCF10

iTrader: (3)

Not a dumb question at all. The higher the numbers get, the more sunken in the wheels will look in relation to the fender. The lower the numbers, the more flush (closer to) it will look in relation to the fender.

With the wheel specs you're looking at, it will look almost identical to this.