SSR Competition Wheels
#16
Some guy at work has SSR Competition's on his cherry red MR2, which actually look really good on the thing. But after seeing it on an inferior car, I just can't picture it well on a GS.
#17
Driver
Join Date: Feb 2001
Location: Berkeley, CA - VENEZUELA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Info
Actually, TE37s in 18" x 8.5 weigh 7.3 Kg or 16 lbs. You can find technical info about the TEs at
http://www.mackinindustries.com/raysinfo.html
SSR's semi solid forging is a compromise between true hot forging (RAYS) and pressure casting. Hence, mechanical properties would rank in the middle.
The new Le37-T line, having the same offset as the TEs (+40mm) but slightly wider lip, may have smaller clearance for big aftermarket brake calipers.
http://www.mackinindustries.com/raysinfo.html
SSR's semi solid forging is a compromise between true hot forging (RAYS) and pressure casting. Hence, mechanical properties would rank in the middle.
The new Le37-T line, having the same offset as the TEs (+40mm) but slightly wider lip, may have smaller clearance for big aftermarket brake calipers.
Last edited by gs4power; 02-16-02 at 10:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mrbig
Wheels, Tires & Brakes Forum
4
04-17-05 11:48 AM