DRE1615

I thought I remembered somebody putting spacers on but I couldn't find it with a search. So I'll ask again...

Any spacers out on the market yet to give the IS-F a little wider stance??

Brand?
Cost?
Size?

Anything would help

sincityIS

UM...........H&R, Ichiba, Project Kics. These have all been out for years. They will work. Just get 5x114.3 and 12x1.5 studs. I would get 15mm rear and 10mm front or 20mm rear and 15mm front if you want aggressive.

passnu2

iTrader: (33)

you can see them on my car next time we meet or swing by my house. I have 20mm+3mm in my rear (23 total) and 15mm for the fronts. the 20 & 15 mm are both bolt on by Ichiba. You can install then in 15 min in your garage.

Hit me up if you want to see them. The fronts are due in a week or so the rears are the only ones on the car. I posted in the chicago section so you can see.

DRE1615

Yeah Mike I've been checking yours out. Honestly, that got me interested in them. I like the more aggressive look.

Ok great. I wasn't sure if the spacers would be different for the IS-F or not. I guess not.

passnu2

iTrader: (33)

I will let you know when the 15mm make it to my house and you can come over and will test fit them on your car so you can get an idea for size. I can give you the info from where I got them from. You may not need as much as I did plus I rolled the rear fenders from the other rims I had. I just shot them an email to see what the status was. I think 15mm will do the job on your car.

Mike

chikken

https://www.clublexus.com/forums/sho...d.php?t=353144
let me know if you need help installing them. big difference in the handling and tractions....

H&R Spacers
120 for a pair
15mm for the front, 20 for the rear

latest pics of it....

chikken

here are the specs you'll need for the spacers....

Type : DRS
Bolt Pattern : 5x114.3
Width, mm : whatever size you want.
Center Bore : 60.1
Thread : 12x1.5
Bolt/Stud : Stud

These fit just perfectly. no vibration or anything at all...goodluck