masboy

iTrader: (30)

i really like this wheels for my 2Gs, but the bolt pattern is 5x112 would it be possible to convert it to 5x114.3 ? thx

VM 2

Maybe if you can find someone ti redrill the rims

tam4G63

iTrader: (1)

if the 5/112 wheel is drilled at 14mm (bolt hole), it would fit. But keep in mind that it wont be center and would cause wheel vibrations. So I would not recommend it. Move on to another wheel.

masboy

iTrader: (30)

aggh damn it....alright, i guess i have to move on...

thanks!

DCMango

5X112 WILL fit your GS. You will need to use tuner lugs and make sure you get a good set of hub centric rings.

excluesive

iTrader: (10)

no need to redrill?

masboy

iTrader: (30)

for real, that's it ?? no re-drill ?? has anybody use 5x112 in their Lexus ?

DCMango

You do not need to RE-DRILL! I am running Lowenhart LSR 5X112s on my 98 GS300, all you have to use are 'stepped' or 'tuner' lugnuts in order for the application to work!

DCMango

Here's proof -

benxd

iTrader: (7)

European wheel fitment (5x120) wouldn't work though right?

DCMango

No, that will NOT work.

masboy

iTrader: (30)

cool. Thanks DCMango!

excluesive

iTrader: (10)

this is definitely going to open a few doors to me
THANKS DC


the gs looks sick too

DCMango

No problem guys! Just a heads up, as mentioned in my earlier post, you need to get a set of hubcentric rings. This is a must for all Lexus vehicles anyways, so for those that have aftermarket rims, you should already have them. For the most part, I have not had any problems, but with the tuner/stepped lugs, there will be a little play, play around with it a little to get rid of the vibrations.

FIVEOHinNJ

Holy ******! I did not know this was even possible! If anyone wants, I can put them in touch with a guy who knows of a shop in Ca that re-drills bolt patterns on rims for $100/per rim.