2jzz30

I want to put some privat profil 19x9.5 wheels in the back of my sc300
the offset is +25.

will they fit without any problems? fender rolling needed? will they sit flush? or are they going to be to much in?

If someone could post pics of a sc300 with the similiar setup in the rear would be very great.

Black_SC

iTrader: (6)

might have to roll rear fenders.

i got +24 19x10's going on the back and i need to roll. should be pretty flush.

plex

iTrader: (11)

It will fit but you will need to roll. Here's my SC with 19x10.5 +26 with a rolled fender. I will find some more without the Z06 lol.

2jzz30

thanks for the reply's I don't know much about offset and things.

can I say that the 9.5 with 25 offset will sit the same as your car cherplex?

plex

iTrader: (11)

Yours will sit in about an inch more than mine.

SoCalSC4

Not quite...

Relative to the fender,
19x9.5 +25 will be 12mm (about 1/2") INBOARD of 19x10.5 +26

Should be a nice fit for the SC. Just be careful of tire sizing unless you want to get into some fender work.