Offsets for SC300? Will these work...
01-31-07, 06:57 AM
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Offsets for SC300? Will these work...
Hi there, was looking to get some wheels that were made for a MKIV Supra and have the following fitments:
Front: 19x8 +40mm
Rear: 19x10 +44mm
Would these look good on a SC300? Meaning an almost flush appearance? Thanks for any insight.
01-31-07, 08:13 AM
Maintenance Moderator
Join Date: May 2005
Location: AZ
Posts: 6,388
Likes: 0
Quote:
Originally Posted by
Marc-P
Hi there, was looking to get some wheels that were made for a MKIV Supra and have the following fitments:
Front: 19x8 +40mm
Rear: 19x10 +44mm
Would these look good on a SC300? Meaning an almost flush appearance? Thanks for any insight.
they'll be good
mine are 9.5" wide with 275 tires and 35 offset, and they are dead even with the fenders... (both faces sit within a few mm of each other)
01-31-07, 12:35 PM
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
So they will be good then? Not too familiar with offsets but I haven't seen SC300 setups with 44mm offsets.
02-01-07, 08:55 PM
Lead Lap
Join Date: Jul 2006
Location: Norcal
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
The wheels will be sunken in. If you want it to be more flush with the fender with those wheels, get a spacer.
02-01-07, 09:15 PM
Maintenance Moderator
Join Date: May 2005
Location: AZ
Posts: 6,388
Likes: 0
Quote:
Originally Posted by
HELLAFLUSH
The wheels will be sunken in. If you want it to be more flush with the fender with those wheels, get a spacer.
his will only set in 3 mm (1/8") in from where mine are - mine are definitely not "sunken in"
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lust
Wheels, Tires & Brakes Forum
5
03-19-12 03:36 AM
phatboi
Wheels, Tires & Brakes Forum
7
05-13-08 02:41 PM
2jzz30
Suspension and Brakes
8
06-30-07 06:01 PM
DETUNED
Wheels, Tires & Brakes Forum
1
03-15-04 05:35 PM
5speed300
Wheels, Tires & Brakes Forum
4
04-06-03 02:49 PM