Wheel fitment on a ES330 20 staggered
09-01-06, 06:32 PM
#1
Pole Position
Thread Starter
Join Date: Sep 2005
Location: AZ
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Wheel fitment on a ES330 20 staggered
I'm looking into getting some 20"s, I'm running 19"s right now, but want to go bigger. I like the look of staggered, the problem is i have a great set of wheels but the specs are 20x8.5 ET20 and 20x9.5 ET25. Even if I ran 245/35/20 tires all around would this still be too agressive? also what about shaving the inner part of the wheel?
09-04-06, 09:58 PM
#2
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking into getting some 20"s, I'm running 19"s right now, but want to go bigger. I like the look of staggered, the problem is i have a great set of wheels but the specs are 20x8.5 ET20 and 20x9.5 ET25. Even if I ran 245/35/20 tires all around would this still be too agressive? also what about shaving the inner part of the wheel?
You will have to do ALOT of shaving and pulling. Also on the ES's your other concern would be the inside of the wheel rubbing the strut. I say pass on these and get a set of wheels that are the proper spec for the car (unless you want to run a aggressive VIP fitment and committed to the work it takes to make them fit)
Thread
Thread Starter
Forum
Replies
Last Post
