1st Gen GS to SC430 20" Wheel Offsets?
#1
Lead Lap
Thread Starter
1st Gen GS to SC430 20" Wheel Offsets?
Hopefully this hasn't been asked before, but I did search:
I have a 1st Gen GS 300 on 17" with a Tanabe 1.8 - 2.0" drop. I am thinking about upgrading my wheels to 20". From what I understand the best offset on my GS is 35mm which could work on all four wheels.
I plan on getting a SC 430 in less than a year. The wheels I have picked for my GS will also look good on the SC. However, I would prefer a staggered wheel on the SC. If possible, what offset will look good for both the GS and the SC in both staggered and non staggared configurations?
When I get the SC I will put the 17s back on the GS.
Thanks,
I have a 1st Gen GS 300 on 17" with a Tanabe 1.8 - 2.0" drop. I am thinking about upgrading my wheels to 20". From what I understand the best offset on my GS is 35mm which could work on all four wheels.
I plan on getting a SC 430 in less than a year. The wheels I have picked for my GS will also look good on the SC. However, I would prefer a staggered wheel on the SC. If possible, what offset will look good for both the GS and the SC in both staggered and non staggared configurations?
When I get the SC I will put the 17s back on the GS.
Thanks,
#4
Originally Posted by rominl
well the thing is, anything that fits on the gs, they are going to be on the conservative side for the sc430, by quite a bit as well. so that's the catch
#5
Originally Posted by rominl
well the thing is, anything that fits on the gs, they are going to be on the conservative side for the sc430, by quite a bit as well. so that's the catch
You might want to think about some spacers.
Thread
Thread Starter
Forum
Replies
Last Post
Kruise
Lexus Vehicles Classifieds
3
06-25-11 05:43 PM