hows your wheel finish holding up?
#1
Driver
Thread Starter
Join Date: Jan 2004
Location: Oregon
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
hows your wheel finish holding up?
I've had several sets of aftermarket wheels throught the years and all except the polished aluminum have had issues with the finish. Barring the unavoidable rock chips that happen hows the finish holding up on the wheels you purchased along with the age of wheel when the issue was noticed?
My issue
Kosei Racing mounted on a 99' Civic HB.
Under 1 month, paint lifting inbetween spokes near hub.
Had the first wheel replaced after repeated calls to distributor and dealing with shipping back and forth and time spent at the local tire shop getting the wheel replace only to notice two other wheels starting the same issues before two months had passed. So I just said screw it and lived with it.
Before the wheels were a year old the clear coat on the lip had lifted and dirt had migrated under it causing it them to look dirty all the time.
Single Shot.
My issue
Kosei Racing mounted on a 99' Civic HB.
Under 1 month, paint lifting inbetween spokes near hub.
Had the first wheel replaced after repeated calls to distributor and dealing with shipping back and forth and time spent at the local tire shop getting the wheel replace only to notice two other wheels starting the same issues before two months had passed. So I just said screw it and lived with it.
Before the wheels were a year old the clear coat on the lip had lifted and dirt had migrated under it causing it them to look dirty all the time.
Single Shot.
Thread
Thread Starter
Forum
Replies
Last Post