before you get all bent out of shape about spinners - Club Lexus Forums

Log In 


before you get all bent out of shape about spinners

Reply
 
 
 
Thread Tools Search this Thread
Old 03-10-04, 03:29 PM   #1
twankys
Driver
Thread Starter
 
Join Date: Mar 2004
Location: Indiana
Posts: 159
Default before you get all bent out of shape about spinners

i was curious of how many of you have seen spinners that are not spinning like they should? do you think if that problem arises i could take the spinner off and maybe clean it out and remount them and they would work? i know most people think add on spinners are tacky but i like em and am going to get some for my sc....one thing i wanted to know though if i put twenys on my 97 sc300 with the eibach pro kit would a addon spinner that sticks out past the wheel just a little bit possibly hit the fender on a bump or would it have to be a pretty big bump? i chose my wheel cautiously and it has a bout a two inch lip so the spinner will hardly stick out.

thanks
ryan
twankys is offline   Reply With Quote
Old 03-10-04, 03:34 PM   #2
Carpe Diem
Lead Lap
 
Join Date: Jan 2003
Location: Virginia
Posts: 771
Default

Yikes, an SC with 20" spinners!!! Careful, if you brake from speeds over 60 it might aeroplane!!!

Seriously, when you've done it post up some pics. You might convince us.

George

Last edited by Carpe Diem; 03-10-04 at 03:37 PM.
Carpe Diem is offline   Reply With Quote
Old 03-10-04, 03:38 PM   #3
DaveGS4
Forum Administrator
iTrader: (2)
 
DaveGS4's Avatar
 
Join Date: Feb 2001
Location: North Carolina
Posts: 27,255
Default

Ryan,

This thread has nothing to do with the SC400/300 model, its a post about wheels and belongs in the wheels / tires forum. That's where I'm moving it.
DaveGS4 is offline   Reply With Quote
Old 03-10-04, 03:45 PM   #4
Ice350
Lexus Fanatic
iTrader: (1)
 
Join Date: Mar 2003
Location: Florida
Posts: 11,311
Default bent out of shape

Hey dude, no one is bent out of shape. I think you're missing the message though. You keep asking for advice about spinners and I don't think there is anyone here who knows a lot about them. Just using logic and observation, it looks like the add on spinners may stick out some. The wheels that come from the factory as spinners seem to be set evenly with the edge of the lip. I can't say for sure. I don't look at them that hard. You may have to get your advice about spinners on another site or at a wheel shop. Post pics when you get them.
Good luck.
Ice350 is offline   Reply With Quote
Old 03-10-04, 04:44 PM   #5
D2-AUTOSPORT
Former Sponsor
 
D2-AUTOSPORT's Avatar
 
Join Date: Jan 2003
Location: D2'sville
Posts: 13,004
Default

Hey twanky different strokes for different folks, one thing, once you start a thread make sure you read all of the responses carefully for a day or two before starting a similar thread. Last night I posted a true spinning wheel (not add-on) made by DUB (who brought Davin in to do R&D) for about 5k with tires, on your other thread.

CLICK HERE TO SEE THAT WHEEL

If someone makes a post that you dont understand in your thread, just press the 'PM' button under their name to send them a Private Message! We will help you to the best of our ability, but like reggie said, not many add on spinner owners 'round these parts! I know someone that bought a set and one of them wasnt spinning the next day so buyer beware! LOL
D2-AUTOSPORT is offline   Reply With Quote
Old 03-10-04, 04:50 PM   #6
twankys
Driver
Thread Starter
 
Join Date: Mar 2004
Location: Indiana
Posts: 159
Default

i know man i saw that i just aint trying to drop that much paper on wheels...i just think it will look good going with the setup i am going to do with the spinner just sticking out just a little bit....trust me i think it looks tacky as hell with a spinner stickin out an inch...cut and paste that to your web adress and the guy said it will look about like that....................... http://abc.eznettools.net/adaptivest...RZAWheels.html
twankys is offline   Reply With Quote
Old 03-10-04, 05:14 PM   #7
D2-AUTOSPORT
Former Sponsor
 
D2-AUTOSPORT's Avatar
 
Join Date: Jan 2003
Location: D2'sville
Posts: 13,004
Default

check these out then, real good price

20" Wheels/Tires + Spinners FOR SALE

I dont know this seller, but I'm just letting you know whats around, maybe you can set something up!
D2-AUTOSPORT is offline   Reply With Quote
Old 03-14-04, 05:25 PM   #8
twankys
Driver
Thread Starter
 
Join Date: Mar 2004
Location: Indiana
Posts: 159
Default please help

i am looking at spinners for my sc i wanted to know if spintek was manufactured here in america? also wanted to know out of all the add on spinners kits which ones were the best....spintek i can get the best deal on just dont want to buy if they are made in china in case any problems arise......i heard if the spinners stops spinning you need to buy new bearings wondering how much that would cost?

thanks for the help
twankys is offline   Reply With Quote
Old 03-14-04, 05:43 PM   #9
lexforlife
Lexus Fanatic
iTrader: (7)
 
Join Date: Dec 2002
Location: So Florida baby
Posts: 6,763
Default

one question no disrespect thought . why??? why on a sc
lexforlife is offline   Reply With Quote
Old 03-14-04, 06:02 PM   #10
twankys
Driver
Thread Starter
 
Join Date: Mar 2004
Location: Indiana
Posts: 159
Default

just like flashy things man
twankys is offline   Reply With Quote
Old 03-14-04, 07:02 PM   #11
lexforlife
Lexus Fanatic
iTrader: (7)
 
Join Date: Dec 2002
Location: So Florida baby
Posts: 6,763
Default

i heard that
lexforlife is offline   Reply With Quote
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 01:54 AM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved