Tanabe NF210 Springs Installed
#106
The following users liked this post:
GSpearlwht (06-25-19)
#107
Looks great. I am having mine installed tomorrow I will post pictures this weekend
The following users liked this post:
GSpearlwht (06-25-19)
The following users liked this post:
GSpearlwht (06-25-19)
#111
#112
Driver School Candidate
Join Date: Aug 2013
Location: MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Can't find a place to install Tanabe
I just ordered my wheels and they have arrived. I wanted to get my car lowered on tanabe springs but can't find a place in Michigan who will install them.
Very frustrating.
Very frustrating.
#114
Driver School Candidate
Join Date: Aug 2013
Location: MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#115
Driver School Candidate
Join Date: Feb 2015
Location: Singapore
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#116
Instructor
Thread Starter
LSD did the installation of the springs and rear camber arms (I live about 5 minutes from their shop). I had spacers on the rear when I was using my stock wheels. However, I'm currently running my DPE S-10 wheels with no spacers.
The following users liked this post:
brand1m (03-16-19)
#118
Driver School Candidate
Join Date: Apr 2015
Location: North Carolina
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#119
Driver School Candidate
Join Date: Apr 2015
Location: North Carolina
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Wheels and car look awesome!!! Do you use spacers at all? If you did what measurements on spacers front and rear? Do you have problems with spacers if you did installed them? I'm thinking dropping the car and use spacers.
#120
No spacers, but the stock wheels definitely don't sit flush. Not too bad though. I didn't install spacers as I plan on throwing on 20" wheels eventually.