Protecting my investment : coilovers sleeves
#1
Pole Position
Thread Starter
Protecting my investment : coilovers sleeves
Well I just got my coilovers and was looking for a way to protect the threads. Found one method online and mad a similar version. I used this vinyl material to repel everything from the shocks. Also sprayed with water repellant. I'm sure I'm not the only one that hates stuck threads???
Me sewing. Yes I have a sewing machine! Lol...comes in handy for projects as such. And I am no pro at all
The final thread in
Threads cleaned and greased
Velcro'ed together and rotated so the solid side will be facing the elements
I have 700 miles on them now and holding up fine
Me sewing. Yes I have a sewing machine! Lol...comes in handy for projects as such. And I am no pro at all
The final thread in
Threads cleaned and greased
Velcro'ed together and rotated so the solid side will be facing the elements
I have 700 miles on them now and holding up fine
#5
My guess is that the purpose of this is so that he doesn't have to clean the threads everytime he mkes an adjustment (from dirt and debris), rather than protect it from damage, which is highly unlikely.
Last edited by XxGoKoUxX; 03-29-12 at 11:40 PM. Reason: typo
Trending Topics
#8
Pole Position
Thread Starter
The true test will be in the next few months, when I try to clean them and adjust them and hopefully work smooth. If u google "stuck coilovers" there are quiet a few people with this issue, and i have experienced first hand how its a pita to free them. Once they did come free, threads were not smooth at all and had a bit of roughness to them. These parts may not rust but they do corrode, i guess that's what it is. And i like to take my car to the beach because its way better on gas than the truck and salt water does wonders. But just sharing.
#9
Driver School Candidate
Dirt and grime and also rust can be an issue for people who live in the states that have salted roads and drive their cars through the winter. This is interested. I'm buying coilovers and I was was looking for a solution to this.
#12
Pole Position
Thread Starter
When I had stuck coilovers. PB blaster and a rag did wonders to wipe them down and free them up. I put grease which is probably not needed but I know here at work we grease all parts if they are not going to be used to prevent weather eating away at threads n such. I used general grease from hardware store.