Parts needed to fit 19x9.5+20 19x11+25
#1
Driver School Candidate
Thread Starter
Parts needed to fit 19x9.5+20 19x11+25
Question my fellow 2IS owners :
I ordered a new set up . Zedd slt
19x9.5+20 up front
19x11+25 in rear
My question is what camber kits I will need . I am purchasing REAR megan UPPER adj. arms . Ready to buy more parts if needed. I was told I will also need the REAR LOWER arms And possibly the REAR TOES .
Some have told me I need the front camber arms but some say I dont . Don't know where to start lol 😅😅
HELP A NEW OWNER OUT.
P.S. Im new to all this . Just recently starting doing these types of things to my cars . So excuse if I'm asking foolish "should be known" questions .
-Peace and love club Lexus
Last edited by JVinnTage; 12-29-15 at 07:28 AM.
#2
Lead Lap
iTrader: (1)
Is that your car in the picture and how low you are dropped? With those wheel widths and offsets (and depending upon the tires you buy), you're going to need a lot of camber to make the wheels fit, as well as rolled fenders and even a slight fender pull to my knowledge.
You'll be fine with the camber and toe arms for the rears that you listed. Personally if I were you and have the cash, I'd look into FIGS Engineering Rear Mega Arms and Toe Links.
As for the front, there are no "camber arms" available. Options for the 2IS are limited. You can buy SPC ball joints and/or Megan upper control arms. Also, it would be smart to buy FIGSr front lower control arm rear poly mounts to prevent excessive toe deflection under braking.
You'll be fine with the camber and toe arms for the rears that you listed. Personally if I were you and have the cash, I'd look into FIGS Engineering Rear Mega Arms and Toe Links.
As for the front, there are no "camber arms" available. Options for the 2IS are limited. You can buy SPC ball joints and/or Megan upper control arms. Also, it would be smart to buy FIGSr front lower control arm rear poly mounts to prevent excessive toe deflection under braking.
Thread
Thread Starter
Forum
Replies
Last Post
passnu2
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
14
10-13-10 08:15 PM