pandes

iTrader: (1)

So I just bought varrestoen es1 wheels with 19x19x5 +12 all around and 235/35/19 tires all around also because I'm AWD. Plus I bought a camber kit for the rear. My question is what else would I need to fit these bad boys in? I have 3 days to switch them and need the wheels on because I have to wheels right now. please help!

Keo

iTrader: (9)

Looks like your gonna need some good Fender Roll or pulling with that aggressive offset. Also some cutting if you plan to have a clean look.

Gville350

iTrader: (10)

Bumper tabs, front and rear cut. Grinding on the plastic/metal inside the front wells. Probably a slight pull and a roll all-around.

VIPking

iTrader: (2)

I pulled mine after i shaved my rear fenders and i got the infamous bacon fenders on one side so be careful. i shaved and did the phone book method on the driver side and i was golden. Unfortunately the passenger side wasn't so lucky because i attempted to pull it with the fender roller. Rear is a 19x11 +0 with a 225/45 wish i had gone with a 235/35 instead. But mine is a 3gs.
good luck

nikogio38

Damm that looks sick....hope to pull the same look when my work rezax come in the mail