ghoul

Could some one please get me the measurements for the bilstein front and rear shocks that everyone seems to be using on the gixxer_drew setup. I only need the distance between the top of the clip that the coil over can rests on to the approximate center of the bolt hole (again both front and back please). I want to see how they compair to the KYB excel-g shocks.
(here is a picture of both for reference) from the picture they dont appear drastically different.

flash9

I should get my Bilstein HD AK1242 and AK1243 in a couple weeks, but here is what Bilstein emailed to me:

Part Number:AK1242
MSRP:$180.54
Weight (lbs):5.15
Old Part Number: 24-017923

Series: B6 (HD)
Position: Front
Quantity Per Vehicle: 2

Bilstein Collapsed Length (IN): 15.53
Bilstein Extended Length (IN): 20.53
Bilstein Collapsed Length (MM): 394.5
Bilstein Extended Length (MM): 521.5
Bilstein Compression @0.52m/s: 1200
Bilstein Rebound @0.52m/s: 3400


Part Number:AK1243
MSRP:$180.54
Weight (lbs):6.81
Old Part Number: 24-017930

Series: B6 (HD)
Position: Rear
Quantity Per Vehicle: 2

Bilstein Collapsed Length (IN): 15.75
Bilstein Extended Length (IN): 22.24
Bilstein Collapsed Length (MM): 400
Bilstein Extended Length (MM): 564.8
Bilstein Compression @0.52m/s: 990
Bilstein Rebound @0.52m/s: 2450