Lower control arms
#1
Racer
Thread Starter
Lower control arms
Hello everyone,
Anyone know whare i can find some lower control arm bushings? 1998 gs400, Im pretty skeptic of the daizens due to the mixed reviews,as my car is bone stock and not lowered. I've looked every whare with no luck,Thanks in advance
Anyone know whare i can find some lower control arm bushings? 1998 gs400, Im pretty skeptic of the daizens due to the mixed reviews,as my car is bone stock and not lowered. I've looked every whare with no luck,Thanks in advance
#5
Racer
Thread Starter
Roca dosent sell the lowers only uppers, i spoke to a cs rep there,
Hardrace i will look into it, im looking for a rubber bushing to keep the stock ride.
Hardrace i will look into it, im looking for a rubber bushing to keep the stock ride.
#7
Racer
Thread Starter
Yea thanks, but im looking for the rubber bushings, this polyurethane bushings give a stiff ride and are more geared toward a moded suspension, unless others think otherwise...
Anyone with a stock set up please advise, thanks for everyone thats posted or even read this thread.
Anyone with a stock set up please advise, thanks for everyone thats posted or even read this thread.
Trending Topics
#9
Pit Crew
iTrader: (2)
Yea thanks, but im looking for the rubber bushings, this polyurethane bushings give a stiff ride and are more geared toward a moded suspension, unless others think otherwise...
Anyone with a stock set up please advise, thanks for everyone thats posted or even read this thread.
Anyone with a stock set up please advise, thanks for everyone thats posted or even read this thread.
#10
Racer
Thread Starter
it seems that at one point back in the day, the bushing were available to buy as a stand alone part from sewell etc, now i guess that's not the case any more, i wonder why?
#11
Driver School Candidate
I used the complete front set of Daizens on my 98 GS400. I agree with Ahheck01, the ride felt no different and you did notice a more positive feel in the steering, but then again, that could be because I also did the lower ball joints at the same time and after the front end bushings and ball joint install everything got tightened up nicely. I would not be afraid of going with urethane bushings on stock struts and springs.
Thread
Thread Starter
Forum
Replies
Last Post