Anyone seen these Ebay UCA's?!? Like SPC's for $95?!?!?
#31
Pole Position
Thread Starter
Wow nice buddy I was going to purchase a set just to check the quality, and if they seemed legit, I woulda just hung on to them, if they were trash, woulda shipped them straight back. Sorry for those who have been asking for the link. For some reason I wasn't subscribed to my own thread? I didn't see anyone replying my apologies. I'll post it incase anyone's interested after his update^^
http://pages.ebay.com/link/?nav=item.view&alt=web&id=131172613897
BLACK Front Adjustable Camber Kits fit Lexus98-00 GS400/98-00 GS400 Base Sedan4D
That's them! Now all you got to do is take some red spray paint, paint those boots up and slap a SPC sticker on those puppies and they should perform just the same! New "Hardware hacking" is what it's called... Works great! FYI ladies and gentlemen they are now available in all colors, Blue! Green! YELLOW! Orange! Red! PURPLE! SPC! BLACK! AND RAINBOW!
#32
Driver
iTrader: (7)
Just got mine in...the silver ones! The arms definitely look solid enough for the application, all welds look to have good penetration. The balljoint looks up to par, functions like any other balljoint I've seen.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
#33
Pole Position
Thread Starter
Just got mine in...the silver ones! The arms definitely look solid enough for the application, all welds look to have good penetration. The balljoint looks up to par, functions like any other balljoint I've seen.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
#36
Pole Position
Thread Starter
Suprised he hasn't replied yet, he sent me a PM saying they were def. Solid and GTG, said he was going to be installing them soon. Also said the ball joints seemed solid and that they very much look like they could be swapped with SPC's say if they went bad and it's indeed true, could MAYBE just swap to a SPC ball joint. But not sure. Honestly, I don't see a company making arms with BJ's and offering them to the public unless they were put through some type of stress test. They've got peoples lives in the hands of the integrity of there product. If someone doesn't have the wallet for SPC's but has room for adjustment, lol, I'd say for $100 try em out. They aren't going to bust on anyone within a year that's for sure, these aren't desert trucks, they are street driven Lexus's and certainly not track rapped cars otherwise you'd probably not be on this page anyhow.
#37
Just got mine in...the silver ones! The arms definitely look solid enough for the application, all welds look to have good penetration. The balljoint looks up to par, functions like any other balljoint I've seen.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
The balljoint is custom for the arm...it has notches for castor and the slide for camber adjustment. If the balljoint went bad, it would looks like you would need a new one from EMUSA. The SPC balljoint might fit it, they look pretty similar.
It will probably be a week or two until I can get them on...I'll post feedback once they're on the car.
#39
Driver School Candidate
Join Date: Jul 2014
Location: ESTONIA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Guys, the nut on top of it looks like it's not very safe and secure, or does it have teeh underneath? Anyone mind taking a pick of the actual BJ and the nut etc. ? Looks as if it should have teeth underneath to secure it in place, or needs some weld there.
#40
Pole Position
Thread Starter
Lol man, try and hold off on the way you phrase your allegations there almost as if you had a set in front of you, I almost, after reading just your first sentence, thank god I read on, was about to hit the X.... Explain to me please in detail how these in fact, to you, look so significantly different to SPC's that you deem them dangerous yet ask if someone can validate a claim of yours strictly from observation, yet an unclear one... Hahaha honesty no disrespect, I believe you should just delete that entire comment and try asking what you may be concerned about in a more appropriate manner rather than such a blatantly biased and misleading approach to it, it's really just not fair to the source, and to those who may stop by... Just sayin....
#43
#44
Driver
iTrader: (5)
no both of mine move freely, i did notice one thing though , when i looked at the holes in the one arm i had there was some extra rubber that i guess they forgot to remove in there great quality control department lol
i hope to have these on this week, just waiting on my buddy to lend me his pitman arm puller
i hope to have these on this week, just waiting on my buddy to lend me his pitman arm puller
#45
Driver School Candidate
Join Date: Jul 2014
Location: ESTONIA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Lol man, try and hold off on the way you phrase your allegations there almost as if you had a set in front of you, I almost, after reading just your first sentence, thank god I read on, was about to hit the X.... Explain to me please in detail how these in fact, to you, look so significantly different to SPC's that you deem them dangerous yet ask if someone can validate a claim of yours strictly from observation, yet an unclear one... Hahaha honesty no disrespect, I believe you should just delete that entire comment and try asking what you may be concerned about in a more appropriate manner rather than such a blatantly biased and misleading approach to it, it's really just not fair to the source, and to those who may stop by... Just sayin....