1997 front upper control arm clarification
#1
1997 front upper control arm clarification
This may seem like a really off situation/question, but hopefully you guys have some insight on this.
I did my lower control arms last year with Supra ones from Carson.
at the same time I ordered a pair of Dorman uppers from Rock Auto. Well it turned out the uppers did not fit. Sent them back.
My uppers weren't too bad back then but now they really need to be replaced. Its been about a year...car has been sitting, life stuff has been in the way and now I'm back to my project.
I just got off the phone with Rock Auto and the tech advised that the Beck/Arnley are probably wider than the Dormans. He went on to say that "look at the picture, it is clearly wider". He also advised that the pictures were "actual" pictures of the parts and not generic images.
After some digging on the web for answers...I found this thread about how some arms are more narrow.
http://us.lexusownersclub.com/forums...-arm-question/
quote from that thread
"Hey John I ordered my LCA`s from Carson also.They were very helpful.Plus all the other places had to order them & the free shipping had to be under 5lbs.I found a place called http://www.importpar...utUs/index.aspx (877) 793-0057. They sell the upper arms for $239 ea with free fedex next day shipping if you plan on changing yours.also don't buy any after market upper arms they all seem to wrong. they measure 11' wide instead of 9 1/2.
the post from above was for a 1993 SC300
I've also read a few threads where a few users used Dorman control arms with no issues.
ie:
https://www.clublexus.com/forums/sus...estions-2.html
Can someone clarify on this. Is there maybe difference between the 92-96 vs 97-99 uppers?
If I have to order the Beck/Arnley I will...but I'm just kind of confused, really don't want to end up with the wrong parts again.
any help is appreciated...
thanks in advance
I did my lower control arms last year with Supra ones from Carson.
at the same time I ordered a pair of Dorman uppers from Rock Auto. Well it turned out the uppers did not fit. Sent them back.
My uppers weren't too bad back then but now they really need to be replaced. Its been about a year...car has been sitting, life stuff has been in the way and now I'm back to my project.
I just got off the phone with Rock Auto and the tech advised that the Beck/Arnley are probably wider than the Dormans. He went on to say that "look at the picture, it is clearly wider". He also advised that the pictures were "actual" pictures of the parts and not generic images.
After some digging on the web for answers...I found this thread about how some arms are more narrow.
http://us.lexusownersclub.com/forums...-arm-question/
quote from that thread
"Hey John I ordered my LCA`s from Carson also.They were very helpful.Plus all the other places had to order them & the free shipping had to be under 5lbs.I found a place called http://www.importpar...utUs/index.aspx (877) 793-0057. They sell the upper arms for $239 ea with free fedex next day shipping if you plan on changing yours.also don't buy any after market upper arms they all seem to wrong. they measure 11' wide instead of 9 1/2.
the post from above was for a 1993 SC300
I've also read a few threads where a few users used Dorman control arms with no issues.
ie:
https://www.clublexus.com/forums/sus...estions-2.html
Can someone clarify on this. Is there maybe difference between the 92-96 vs 97-99 uppers?
If I have to order the Beck/Arnley I will...but I'm just kind of confused, really don't want to end up with the wrong parts again.
any help is appreciated...
thanks in advance
#3
This is my confusion. I had ordered the dormans and they didn't fit.
I need clarification on 92-96sc300 vs 97-99sc300
below is my order....both parts had to be returned because they did NOT fit
1997 LEXUS SC300 3.0L L6
Suspension : Control Arm
DORMAN Part # 520443 {4863019025, 4863029046, WC120443} Complete Arm w/Ball Joint; Includes Ball Joint and Bushings
Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Front Left Upper; Includes Ball Joint and Bushings
DORMAN Part # 520444 {4861019025, 4861029046, WC120444} Complete Arm w/Ball Joint; Includes Ball Joint and Bushings
Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Front Right Upper; Includes Ball Joint and Bushings
I need clarification on 92-96sc300 vs 97-99sc300
below is my order....both parts had to be returned because they did NOT fit
1997 LEXUS SC300 3.0L L6
Suspension : Control Arm
DORMAN Part # 520443 {4863019025, 4863029046, WC120443} Complete Arm w/Ball Joint; Includes Ball Joint and Bushings
Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Front Left Upper; Includes Ball Joint and Bushings
DORMAN Part # 520444 {4861019025, 4861029046, WC120444} Complete Arm w/Ball Joint; Includes Ball Joint and Bushings
Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Front Right Upper; Includes Ball Joint and Bushings
Last edited by Nguyen07; 02-13-14 at 04:46 AM.
Thread
Thread Starter
Forum
Replies
Last Post
bentleymp2
Suspension and Brakes
2
01-06-16 10:52 AM
Jaden1
ES - 1st to 4th Gen (1990-2006)
8
02-16-14 05:39 PM