Randre19

Debating which one I want to buy. Anyone have comparison pics?

Thanks

Randre19

Also, can 20" rims fit if the S techs are installed? or only 19"?

Wilnard

I have s tech with 19 I don't see 20 inch being able to fit without rubbing issues but I'm not a professional lol what I do know is that when and if you lower the car you better get rear camber arms to ajust for the rear

8jml8

Do you really need a camber kit for the rears?

Wilnard

Yes you DEFINATLY need rear camber arms if you lower te car with tien s tech springs I'm running negative camber in the rear right now cause no company makes rear camber arms for this car yet I have a very aggressive offset in the rear so I don't have too much room to camber back out mabee a degree or 2 at the most check my car out in Instagram Wilcutyour****up

8jml8

what size wheel and tires are you running? i am going with a 20x9 38 offset with a 235/30 in the front and 20x10.5 with a 45 offset 255/30/20 rear tire

Wilnard

I'm running velgen 19 inch by 9.5 front with 235-30/19 rear 265/25/19 10.5 rim you should be fine with a 255 in the rear car is DEFINATLY gonna tuck in the rear but it'll look awesome don't plan on having anyone in the back set I had my lil niece and nephew in the back yesterday and I ate a lil tire lol you gotta check out my Instagram to get a good look at the car I love the vossen set up I was gonna go with them but I wanted a lol more aggressive offset and kinda look stock

ISDAS

anyone else have pics of the H techs fitted? only found one on these forums..
w/ oem rims etc.

neilvosko

looking for same....H Tech with F sport stockies

Sheddy

H-Tech

Sheddy

H-Techs w/ 15mm F&R spacers

HIryfro

H-Techs with 23mm front, 18mm rear spacers.

AdvanSLF

nice shots hlryfro. can you show a side shot of the entire car, also a side shot of front and rears for comparison?

why did you need spacers with your stockies by the way? are you running a square setup?

daduc

Here are some pics of my car with H-techs just installed yesterday.

HIryfro

I used the spacers to push the wheels out to the fender lips. That will keep me happy while I'm waiting for my Rims.