ISFSPRT

anyone know if this works for both RWD and Awd?

aTeAse

There are two designs, one for the RWD, and another for AWD.

RWD and AWD suspension are different.

neilvosko

the one thing i notice from pics is stock is linear and teins are progressive rate

Wilnard

I just lowered my 2014 Lexus is 350 f sport with tein s tech springs and velgen 19 inch rims I feel like the camber in the rear is sitting funny

amoney805

iTrader: (1)

Have you gotten an alignment yet?

Wilnard

Yes I got an alignment at the performance shop it brought the car too i need to pic up the print out

Wilnard

Anyone have camber issues in the rear tires after lowering the car /. \ I don't have camber arms in rear but the alignment guy said it couldn't be cambered out

8jml8

Can s tech springs only be used with 19" wheels or can 20" fit? I find mixed answers on this, and i also feel like a 19" wheels is still too small for the gapping. The FSPORT wheels are a 19" and i feel like you should be able to get bigger then that size with these springs? Please help me!!!!

Wilnard

My f sport came stock with 18 inch I dropped 19inch and s tech springs and the gap is clean check out my car on Instagram wilcutyour****up I don't think 20 inch will fit unless you roll the fenders I'm not a mechanic tho

8jml8

Wilnard, do you have a picture of the car before with 18" wheels and lowered. And a picture with 19" wheels and lowered.

Wilnard

No I don't but I have a bunch of pics on my Instagram but I can't post my name cause it has a curse word in it so the forum doesn't allow it lol. Hash tag #velgen and my white 350 f with matte silver will pop up it's the only one with matte silver

AeroEngi

Thinking about getting these springs so naturally, I'm doing a lot of research. Do these really affect the camber? Does anyone have info on how much worse the camber is when compared to spec/stock?

IS350S2K

Recently got an alignment after installing the springs. Camber is -1.3 and -1.1 Fronts (spec is -1.4 to 0.2) and -2.4 and -1.9 rear (spec is -1.9 to -0.4) Only my driver side rear was out of spec..

8jml8

IS350S2K- i am not too familiar with the numbers you wrote. is that a big difference or can you simplify what you wrote.

Wilnard

Is350 f sport my
Spec after tien s tech springs and 19 inch rims the from is at driver side -.96 and from passenger -1.16
Camber In rear driver side -1.37 and passenger rear is at -2.66 this is after alignment the toe is set perfect but seems like the car pulls to the right a tad bit but I guess that's from the negative camber in the rear. You will DEFINATLY have camber issues when you lower the car because there aren't any rear camber arms available for the car yet. My off set on my 19 are so aggressive I need a little bit of negative camber for the tires to fit. The tires are stretched on a 10.5 in rim 265-30/19 but I have about a finger in between my fender and tire In rear so when camber arms are available I'll slap some on but only will be able to mabee get another degree before it rubs so I'll still be a lil negative camber in the rear. I'm not looking over typing errors lol