JB5674

I just put my B2 spacers on 20mm all around. Man, I'm rubbing like a ****. Small dips, large dips, turning. I'm kinda pisssed off. What do I need to do to resolve the rubbing? Fender mods? Please help!!!

daobn24

That's odd, I was running 20mm spacers with RS*R Downs and didn't rub at all. What suspensions are you using?

JB5674

Using the exact same as you....RSR Down

JB5674

So I just looked at the box on my springs. I have RSR Downs yet they are for RWD applications and I have an AWD.
The part I have is T195D. Could this be the issue. Prior to spacers, the car has been fine.

JB5674

RS-R Lowering Springs Lexus IS250/IS350 AWD [Down Sus] (2014-2015) T197D Lowers 25 to 30mm Front and 20 to 25mm Rear - Part used to be #T197S but was changed to T197D by RSR in Apr 2014

RS-R Lowering Springs Lexus IS250/IS350 RWD (2014-2015) T195D Lowers 30 to 35mm Front and 25 to 30mm

So the RWD is 5mm lower. Would this cause the rubbing? Maybe this is why I looked so tucked in the rear before lol

JB5674

anybody have any suggestions for point of rubbing in the rear ?

LexSense

iTrader: (2)

Hmm, I'm on RSR Downs too but on a RWD with 20mm all around. They're ebay brand spacers though lol. No rubbing whatsoever - even on harshest of dips.

It could be due to the incorrect springs. Are you sure you have 20mm spacers?

Stock rims, stock tires?

JB5674

All stock wheels and tires.

jkonquer

So is it safe to say rsr downs with 20mm spacer on rwd will work without any issues?

daobn24

Yes, it's safe.

i2fat

iTrader: (2)

Has anyone done 25mm spacers in the front with RSR Downs? 20mm might not be flush enough for the fronts.

JB5674

They are flush. Wait til it rains. You will have splash up and back all over the front. People with 25mm in the front claim to rub.

UPDATE: from above - purchased ichiba v2 17mm spacers. havent installed yet. I will run the new spacer or Ill get a fender pull. Really like the look of the 20mm in the rear and would like to keep it

aTeAse

I have 25mm fronts with coils on, pretty low, no rubbing. I actually rub on the 20mm rears.

i2fat

iTrader: (2)

Kinda wanting to go with 25mm in the front with RSR Downs. 20mm in the rear for sure.

Letsstance

do you have eny fender work done to the front and/or back? and do you have awd or rwd?