LS400 Brake conversion done BUT
06-17-13, 09:24 AM
#31
Lead Lap
Thread Starter
Join Date: Mar 2010
Location: NH
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
bought and put on already but thanx xspsi6.
As far as the pins to recalibrate, my pins are different the video and pic posted. This what i ahve...am looking at the right thing? If this right are there diff pins i should be lookn at?
As far as the pins to recalibrate, my pins are different the video and pic posted. This what i ahve...am looking at the right thing? If this right are there diff pins i should be lookn at?
06-17-13, 07:15 PM
#32
You are running to the exact same problem as I am as my pins look just like that so every diagram I have found thus far does not work for my year gs so I am almost thinking the pins are at the diag port under the hod but nothing solid yet 
I am shocked that there is no type of diy yet as I know for sure this is a common problem and as soon as I figure it out I will do a diy.
I am shocked that there is no type of diy yet as I know for sure this is a common problem and as soon as I figure it out I will do a diy.
06-24-13, 05:16 AM
#35
Lead Lap
Thread Starter
Join Date: Mar 2010
Location: NH
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
is it all set now?
i had my local dealer look into it while getting service and they told me it was a bad speed sensor. Not sure i'm with them on that. Is the speed sensor located by the brakes?
i had my local dealer look into it while getting service and they told me it was a bad speed sensor. Not sure i'm with them on that. Is the speed sensor located by the brakes?
06-24-13, 06:17 AM
#36
Yea the speed sensor is in the hub and could be the problem if you maybe ripped a wire when installing the brakes? The wires are tiny and could be tough to see since they are inside the rubber line to keep the elements out but if you get it on a good scanner you will know exactly which one could be causing the problem.
06-24-13, 12:36 PM
#37
Lead Lap
Thread Starter
Join Date: Mar 2010
Location: NH
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
yea the dealer cleared it and did a bunch of ohm test (they wrote it all down and i dont have the paper infront of me) but thats what am they are saying...but they want $400 to fix lmao. trynna see how much my mechanic will charge or if its something i can do.
06-24-13, 06:11 PM
#39
Did you check for DTC's I bet it's one of the sensors.
Should've done this along time ago! ^^^^Anyways here you go!
https://www.clublexus.com/forums/gs-...to-fix-it.html
06-26-13, 05:44 AM
#41
Lead Lap
Thread Starter
Join Date: Mar 2010
Location: NH
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
