IS350 caliper upgrade! Need help!
05-22-13, 11:26 PM
#1
Lead Lap
Thread Starter
iTrader: (12)
Join Date: Oct 2009
Location: 626, SGV, CA
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
IS350 caliper upgrade! Need help!
Does anyone know how to remove the brake dust shield cover?! I took out all the bolts and still can't seem to remove the shield...
05-23-13, 05:17 AM
#4
It's much easier to just cut a small portion of the dust shield and then bend it a bit instead of removing the hub. Unless you already spent the money on the 350 shield
BTW: I've done my previous IS250 and a couple of friends and thats the way I've done it every time.
BTW: I've done my previous IS250 and a couple of friends and thats the way I've done it every time.
05-23-13, 06:56 AM
#5
Driver
iTrader: (1)
Join Date: Aug 2012
Location: NC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I ran into this problem when I was doing mine. It is impossible to remove the wheel bearing to install the dust shield without damaging it. I tried wd-40, prying it off, and yanking it out with the wheel back on. I eventually gave up and just trimmed the dust shields with a snip.
Thread
Thread Starter
Forum
Replies
Last Post
brybo86
LS - 1st and 2nd Gen (1990-2000)
8
05-05-16 08:31 PM