Rear Traction Link
#1
Rear Traction Link
I'm need new set of rear traction links for my 92 sc300. I wanted to know of any other companies that make quality rear traction links for our cars, besides battle version. I've seen megan, but I was looking for other options. Also, I'm riding on 18x9 rear & 18x8 front with stance coilovers.
#3
I have nothing against battle version. I'm just looking into other options. I came across people using megan, but realized that besides battle version, there doesn't seem to be any good aftermarket upgrades for this part, so I decided to ask on the forums.
Long story short I was planning on putting battle version links and rods on the front and rear of my car this summer. I put new coilovers on this past Decemeber and noticed my passenger side rear traction link was in bad shape and needed to be replaced asap.
Long story short I was planning on putting battle version links and rods on the front and rear of my car this summer. I put new coilovers on this past Decemeber and noticed my passenger side rear traction link was in bad shape and needed to be replaced asap.
#4
Pole Position
good speed also makes a set i have them on my car they work great. also can get the control link in a set on ebay for 229 bucks if they have any left. they would both be fully adj. which really helps you fine tune your driving experiance.
#7
Lexus Test Driver
iTrader: (14)
Join Date: Jun 2009
Location: CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Just get bver's. Your only other options are
1. just stay stock w/ polyurethane bushings in the knuckle and traction rod
2. go ebay. always a solid decision for building a car.
3. go across the pond to japan and pay the jdm tax
1. just stay stock w/ polyurethane bushings in the knuckle and traction rod
2. go ebay. always a solid decision for building a car.
3. go across the pond to japan and pay the jdm tax
Trending Topics
#9
I will not consider putting a gsp product on my sc. I'm not putting them down as I have never used their products, but I know too many honda guys that have had a lot of problems with their turbo parts failing.
#11
Lexus Champion
iTrader: (31)
I am 99% sure god speed and megan arms are the same just different colors all made from the same sweat shop in china but I run the god speed traction rods which side by side with the megan units look 100% the same.
It is a part that is kind of hard to screw up honestly.
It is a part that is kind of hard to screw up honestly.
#14
Pole Position
iTrader: (12)
Can you elaborate a bit on the "fine tune your driving experience"?? How does this part allow you change the driving feel? I'm new to traction links and actually all suspension components. Not trying to thread jack just figured it would be useful info and if I start a new thread I'll get yelled at...lol Thank you!
#15
Adjustable rods and links allow you to get an alignment to a certain specification. This is beneficial when running a lowering springs or coilovers which can cause excessive camber and toe.