Orozco27

iTrader: (2)

hey guys i got road magnet lowering springs and i installed the back and came out fine but when i did the front now thats was the problem now its not sitting right!! its too high and if i got them back wards it still shouldnt sit like the way it sits my stock was lower

projectdna

iTrader: (56)

the back isn't supposed to be that low w/ road magnet springs.

the front isn't supposed to stay that high, either.

i think you might've gotten the fronts and the rears mixed up.

Orozco27

iTrader: (2)

isint the front springs the ones with the flat spring on top?

Gplex1987

Lol

Oh god

Gplex1987

I thought you installed hydraulics on your car for a second.

aznoutkast

hit them switches yo!!!!! lol...just do a swap around i guess and boom even lowering..did you check out "mead storm trooper" when he lowered his?

Shervin350

u mixed up the front nd back buddy the back will nver get that low, swap the front and rear

IS2FIFTY

iTrader: (5)

your car is considered "squatting" LOL its normal it some cases to an extent but in yours, you definitely got them mixed up lol

MyIS350G

iTrader: (6)

probably mixed up!
here is a pic of the some springs which one you put up front and rear?

Orozco27

iTrader: (2)

on the front i put the right 2 springs and on the rear i put the left 2 springs

jay90011

iTrader: (23)

You have them mixed. The ones on the left are the fronts . The ones on the right are your rear .

Orozco27

iTrader: (2)

and the ones on the left how do they go? the way they are in the pic or upside down?? and the rear how does the flat top of the springs face downward??

jay90011

iTrader: (23)

The flat part of the springs goes on the top portion connecting to the top hats for the left springs that go in the front. As for the rear I don't remember if they have a flat part or not

laobo979

iTrader: (5)

Now you fit in with them truck out in Cali *** down, face up lol.

Vroomin350

iTrader: (28)

Yea you definitely have them mixed up. This is as low as it goes on the rear for RM's.