stance-solutions cup kit - Club Lexus Forums


stance-solutions cup kit

Reply
 
 
 
Thread Tools Search this Thread
Old 08-06-12, 01:26 PM   #1
seivonecsu
Lead Lap
Thread Starter
iTrader: (7)
 
Join Date: Sep 2011
Location: ny
Posts: 436
Default stance-solutions cup kit

curious to know if anyone tried the stance solutions cup kit and if they like it.... i love the way my coils ride but it would be nice to have the instant height adjustment.... any info would be appreciated....
seivonecsu is offline   Reply With Quote
Old 08-06-12, 01:45 PM   #2
handoverfi
Lexus Champion
iTrader: (7)
 
Join Date: Feb 2007
Location: Tx
Posts: 2,255
Default

I posted this a while back and not one member responded...
handoverfi is offline   Reply With Quote
Old 08-06-12, 02:14 PM   #3
seivonecsu
Lead Lap
Thread Starter
iTrader: (7)
 
Join Date: Sep 2011
Location: ny
Posts: 436
Default

hopefully ill get a lil better luck... i was doing more research on them and they are back ordered 6 to 7 weeks and from what i can get out of there webpage this is only for the front not the rear... i am looking for something for all 4 corners...
seivonecsu is offline   Reply With Quote
Old 08-06-12, 03:22 PM   #4
SPRTNYDSN
Lexus Test Driver
iTrader: (2)
 
SPRTNYDSN's Avatar
 
Join Date: Dec 2009
Location: NY
Posts: 843
Default

I've been checking them out on FB, they got a descent price for the basic kit. Just get your own Viair VC380 compressor for like 200 bucks and I guess your Good Money. I just want to lift the front, the rear can stay tucked.
SPRTNYDSN is offline   Reply With Quote
Old 08-06-12, 07:40 PM   #5
YxUxMADDDD
Lead Lap
iTrader: (2)
 
Join Date: Feb 2012
Location: TX
Posts: 702
Default

Thinking about getting this... Hope Stance coils are 20mm in diameter. Fronts is all I need.

http://www.stance-solutions.co.uk/1

Hope this helps with questions.

Last edited by YxUxMADDDD; 08-06-12 at 07:53 PM.
YxUxMADDDD is offline   Reply With Quote
Old 08-06-12, 07:44 PM   #6
drgonzo370
Driver School Candidate
iTrader: (1)
 
Join Date: Jul 2010
Location: OH
Posts: 28
Default

I'll join the club of wanting to see some more info from a member. They say they fit 20mm and 22mm coils, I see BCs have 40mm+ diameter pistons so wouldn't they be too small? Or am I looking at two different measurements?
drgonzo370 is offline   Reply With Quote
Old 08-06-12, 07:56 PM   #7
YxUxMADDDD
Lead Lap
iTrader: (2)
 
Join Date: Feb 2012
Location: TX
Posts: 702
Default

You measuring the coils or the overall? I believe they're talking about the coils itself. I dunno... Guess I'm gonna measure mines and probably cop this kit soon.
YxUxMADDDD is offline   Reply With Quote
Old 08-06-12, 08:19 PM   #8
Lextasy671
Lexus Test Driver
iTrader: (1)
 
Join Date: Oct 2007
Location: Guam
Posts: 1,195
Default

hmm..curious also about this kit.
Lextasy671 is offline   Reply With Quote
Old 08-06-12, 09:43 PM   #9
neegroy
Lexus Test Driver
iTrader: (18)
 
Join Date: May 2010
Location: NY
Posts: 1,597
Default

Let's set up a group buy LOL
neegroy is offline   Reply With Quote
Old 08-06-12, 10:20 PM   #10
S2dannyKeo
Pole Position
iTrader: (1)
 
Join Date: Mar 2012
Location: Texas
Posts: 255
Default

just how much is it for the whole set up i was planning to get the phantom version
http://www.phantomsuspension.com/
S2dannyKeo is offline   Reply With Quote
Old 08-07-12, 05:54 AM   #11
seivonecsu
Lead Lap
Thread Starter
iTrader: (7)
 
Join Date: Sep 2011
Location: ny
Posts: 436
Default

Anyone know how many mm the megan lp coils are front and back....
seivonecsu is offline   Reply With Quote
Old 08-07-12, 07:39 AM   #12
vipXjunky
Lexus Test Driver
iTrader: (28)
 
vipXjunky's Avatar
 
Join Date: Feb 2009
Location: Southern CA, 562
Posts: 1,210
Default

would this clear my speed bump issue? lol! if the rear is dumped and the front raised, i wonder if it'll still scrape the shiiiiiit out of the bottom still..
vipXjunky is offline   Reply With Quote
Old 08-07-12, 11:43 AM   #13
seivonecsu
Lead Lap
Thread Starter
iTrader: (7)
 
Join Date: Sep 2011
Location: ny
Posts: 436
Default

Quote:
Originally Posted by BBRolex View Post
would this clear my speed bump issue? lol! if the rear is dumped and the front raised, i wonder if it'll still scrape the shiiiiiit out of the bottom still..
This is why I would like to do all four corners.... Dropped in NYC is a little hard on the bottom of the car....
seivonecsu is offline   Reply With Quote
Old 08-11-12, 09:18 AM   #14
drgonzo370
Driver School Candidate
iTrader: (1)
 
Join Date: Jul 2010
Location: OH
Posts: 28
Default

Bumping this back up, anyone got anything else on these? Anybody know the coil diameter for BCs? Its really tempting for the price, wonder if they would do a group buy......
drgonzo370 is offline   Reply With Quote
Old 08-11-12, 11:00 AM   #15
YxUxMADDDD
Lead Lap
iTrader: (2)
 
Join Date: Feb 2012
Location: TX
Posts: 702
Default

I had UAS and don't like it much. Unless you plan on spending $5k on your UAS setup then that's a different story. Coilovers are stiffer cause I plan on going NA-t soon. I like driving slammed but the front always bottom out. I just got OWNED by a hump at the entrance of a shopping center last week. Car was literally on the cement and "see sawing" front and back so I had to have one person sit on my trunk, one person gassing in reverse, while I push in the front. It sucked! With this kit, at least I can raise my front and not get owned again. ******ty feeling ever!! With this front cup kit, I can raise it then slam it after I conquer hills. I totally agree with a group buy! I believe the front set is $650. Someone get a hold of the merchant and get this group buy rolling!! I'm down!
YxUxMADDDD is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
2008 IS350 One cup holder? FrancisV IS - 2nd Gen (2006-2013) 16 06-16-14 10:33 PM
stance coils with UAS? MRCDWJR Suspension and Brakes 9 02-19-14 12:23 PM
Rear Console or Cup Holder solution for CT200H bburns CT 200h Model (2011-present) 5 06-02-12 10:23 PM
new CO. that build CUP kits...... handoverfi GS - 2nd Gen (1998-2005) 0 01-05-12 07:19 AM
Cup holder rattling issue! diamondgs4 GS - 2nd Gen (1998-2005) 1 10-22-02 02:14 AM


Tags
air, assignment, ca, cup, cups, es330, kit, ls430, mountain, solution, solutions, stance, stancesolution, uas, view

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 08:28 PM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved