MIKU*SC3

iTrader: (10)

Hey everyone im changing my springs on my stance coilovers and need some advice on how to remove the spring. Do i work from the bottom up and take the bottom mount off and take the collars off, or do i have to do it from the top?

A quick reply will be very helpful because im in the process of doing it. Thanks!!

charley240

iTrader: (6)

Although not familiar with stance coilovers for the sc
Some advice is to loosen the top locking but while the coilovers are loaded on the ground, then remove the coilovers. This way when the coilovers are off you don't need so much force to remove the lock nut
Charley

MIKU*SC3

iTrader: (10)

Thanks, and i just got the springs off but now the spring wont fit because its just a little to small.. FML....

charley240

iTrader: (6)

If the spring is a hair small, just grind the inner portion of the spring a little
Charley

MIKU*SC3

iTrader: (10)

Well i started to grind down the collar that the spring sits in but i didnt have enough time to finish it. So ill get to it again next week.