LamTheSham

iTrader: (8)

Wait what! I moved the bottom ring and adjusted the top collar. Is that how it's done? :O

Fernanhaya

I got confused too. I Loose the bottom ring and turn the 2 in the top at the same time that way i dont change my preload. I think im doing it right.

Fernanhaya

Any Ideas on what could cause that. Cause IMO i think an inch is way too much difference.

CCJ22

iTrader: (26)

It's how our cars are. Nothing is wrong with your coils

LamTheSham

iTrader: (8)

Yeah. I was playing around with my rear coils and one side always sits differently regardless. I finally got it close enough and gave up. :P

Shervin350

is it a AWD?

bduboulay

I was messing aroun with my preload... Where should the preload sit? Do I just put it tight to the spring and that should reset them?

LexStylez

^^ This video should be useful

bduboulay

I installed my coilovers and there is clunking noise coming from the suspension. Anyone know what this could be?

IS2FIFTY

iTrader: (5)

any updates on this issue? lol I too just realized my back left is lower than my right but don't want to really mess with it if its not going to make a difference. I have a AWD if that makes a difference

bduboulay

You should fix that cause your car is going to ride uneven this is not good for breaking and accelerating. It throws the whole far off balance. Not to mention it doesn't look proper.

LamTheSham

iTrader: (8)

I dumped my **** even more yesterday. 1.5 finger gap from fender to rim in the front, 1/2 a finger from fender to rim in the rear. The rear right is always lower though. I adjusted it by making it three threads taller than the left side. So for me, in the rear, I have about 12 threads left before it is completely maxed out. I did 12 on the rear driver side, and 15 on the rear passenger side. That way, both sides sit even. :P

bduboulay

It took me a bit to get my car even at all 4 corners. You need to remember that if you lower the driver front it will raise the passenger rear and vise versa. I still dealing with some rubbing issues

IS2FIFTY

iTrader: (5)

my rear is just just off by a tiny bit, probably gonna lower it more tomorrow when I have some time