DIY - Rear Axle Carrier (Knuckle) Bushing Replacement
#331
Driver School Candidate
Join Date: Apr 2010
Location: TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/itm/ARM-BUSHING-REAR-ASSEMBLY-TOYOTA-CROWN-1999-2004-OEM-42305-30070-/261242605694?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AGS300&hash=item3cd345d07e&vxp=mtr
The above link seems like a cheaper alternative that will work on our 98-05 Lexus Gs's. $12.95 with free shipping.
The above link seems like a cheaper alternative that will work on our 98-05 Lexus Gs's. $12.95 with free shipping.
#332
Advanced
Thread Starter
Arm Bushing Rear Assembly Toyota Crown 1999 2004 OEM 42305 30070 | eBay
The above link seems like a cheaper alternative that will work on our 98-05 Lexus Gs's. $12.95 with free shipping.
The above link seems like a cheaper alternative that will work on our 98-05 Lexus Gs's. $12.95 with free shipping.
#333
Driver School Candidate
Join Date: Apr 2010
Location: TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
The "TAB-123" appears to be the trailing arm bushing, which this auction is NOT listed for. Correct?
#334
Advanced
Thread Starter
Shrug, maybe. The part looks wrong, it is a rubber bushing as opposed to the factory rod-end type bushing. I wouldn't switch to a different design unless I had to. Why not get http://www.ebay.com/itm/ARM-BUSHING-REAR-ASSEMBLY-TOYOTA-CROWN-1999-2004-OEM-42305-22040/261248087362?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D163%26meid%3D9166937720729494807%26pid%3D100005%26prg%3D1088%26rk%3D1%26rkt%3D4%26sd%3D261242605694%26from the same seller, this is what the OEM looks like.
#335
Driver
@Mike from Figs:
Is there a SuperPro solution???
I replaced the traction arm ones and it made a HUGE difference. I would like to replace the carrier bushing and control arm bushing but I can't find a replacement for the JZS16#.
Chris
Is there a SuperPro solution???
I replaced the traction arm ones and it made a HUGE difference. I would like to replace the carrier bushing and control arm bushing but I can't find a replacement for the JZS16#.
Chris
#336
The Maker
iTrader: (11)
There is no Superpro solution because its not a poly bushing, its a bearing. I am looking into a run of axial type grease pack bearings similar to stock, but the precision bearings works well now that we have the tolerance sorted out.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#337
Driver
Thanks Mike. After I asked the question, I actually worked out the answer for myself after reading through this thread.
I will hit you up for a pair in a week or so. (All my other Figs gear is going well) My next question then is, what about the bush in the lower arm? I am keen on your arms, and they are a very reasonable price for what they are, however, my wallet is quite empty right now. If Super Pro do a bush that will suit, it will be an option for me until I get your arms later on down the track.
I used the SPC tool on the traction arms and it was FANTASTIC. I had to use the impact gun though. I even used the tool mounted in my vise to remove the old bushings in the arms.
I am back in Australia after 2 years in Japan and successfully brought my JZS161 Aristo home with me. It's loving the Australian roads compared to the slow traffic of Japan!
Cheers,
Chris
I will hit you up for a pair in a week or so. (All my other Figs gear is going well) My next question then is, what about the bush in the lower arm? I am keen on your arms, and they are a very reasonable price for what they are, however, my wallet is quite empty right now. If Super Pro do a bush that will suit, it will be an option for me until I get your arms later on down the track.
I used the SPC tool on the traction arms and it was FANTASTIC. I had to use the impact gun though. I even used the tool mounted in my vise to remove the old bushings in the arms.
I am back in Australia after 2 years in Japan and successfully brought my JZS161 Aristo home with me. It's loving the Australian roads compared to the slow traffic of Japan!
Cheers,
Chris
#338
Driver School Candidate
Thanks to people like you we have solutions available.
I am wondering if the rear Axle Carrier (Knuckle) Bushing - Part Number : 37H125 from mount shop will work on my 2004 Lexus Is300? Also is there a difference between the one listed on ebay by IrL?
Thanks again Lyonkster for starting this.
MLis300
I am wondering if the rear Axle Carrier (Knuckle) Bushing - Part Number : 37H125 from mount shop will work on my 2004 Lexus Is300? Also is there a difference between the one listed on ebay by IrL?
Thanks again Lyonkster for starting this.
MLis300
#339
Driver School Candidate
DIY - Rear Axle Carrier (Knuckle) Bushing Replacement
Hi,
Thanks for posting this.You're help is appreciated!
I have a question regarding the bushing size! Do you happen to know if the Mount Shop Part #37H125 will work/fit in a 2004 Lexus Is300?
I know you also mentioned that I could get this bushing from a ebay seller named irl car parts! Is there any difference between the mount shop part? I contacted the mount shop and they said that their part was manufactured in Thailand!
Kindly let me know.
Thanks
MLis300
Thanks for posting this.You're help is appreciated!
I have a question regarding the bushing size! Do you happen to know if the Mount Shop Part #37H125 will work/fit in a 2004 Lexus Is300?
I know you also mentioned that I could get this bushing from a ebay seller named irl car parts! Is there any difference between the mount shop part? I contacted the mount shop and they said that their part was manufactured in Thailand!
Kindly let me know.
Thanks
MLis300
The following users liked this post:
digitatc (05-07-21)
#340
Driver School Candidate
Will this work on a Lexus is300 2004?
champ, whenever you find them I suggest u buy them. I ordered mines right after lyonkster without knowing if they would even work, because i saw the ebay guy only had 2 left. these things are incredibly difficult to find. we've only seen the ebay guy in ireland and the shop in new zealand sell these. i searched for this problem with the 1st gen is 200/300 and some of those owners didn't know about these.
#341
The Maker
iTrader: (11)
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Last edited by FIGS; 01-19-14 at 08:32 AM.
#342
Advanced
Thread Starter
Ah, that is a nice tool! Wish I had that when I was pressing my bushings out!
#344
The Maker
iTrader: (11)
did my own quick write up.
http://figsengineering.blogspot.com/...c430-rear.html
http://figsengineering.blogspot.com/...c430-rear.html
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions