Front RCA dimensions
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Aug 2010
Location: SC
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Front RCA dimensions
Like the title says I'm looking for someone that has front RCA's laying around that they can give me a rough sketch with the dimensions of them. I have access to get them custom made so I just need the exact measurements for it. Thanks you in advance!! If you can just send a pic to 210-516-5022...
#3
Pole Position
iTrader: (4)
PM me your email and I'll send you a Solidworks file for the 38mm version that I made not too long ago. I've already made sure that all the dimensions are correct by using the actual parts on my own car.
Disclaimer: Use my drawing at your own risks. I will not be responsible for any damages or loss if you cut the RCAs wrong or using the wrong tolerances.
Disclaimer: Use my drawing at your own risks. I will not be responsible for any damages or loss if you cut the RCAs wrong or using the wrong tolerances.
Trending Topics
#8
PM me your email and I'll send you a Solidworks file for the 38mm version that I made not too long ago. I've already made sure that all the dimensions are correct by using the actual parts on my own car.
Disclaimer: Use my drawing at your own risks. I will not be responsible for any damages or loss if you cut the RCAs wrong or using the wrong tolerances.
Disclaimer: Use my drawing at your own risks. I will not be responsible for any damages or loss if you cut the RCAs wrong or using the wrong tolerances.
#9
Pole Position
iTrader: (4)
Here's a link to the Solidworks file for the RCA. I've uploaded it at Megaupload so the file wont be going anywhere for a while.
http://www.megaupload.com/?d=RCIZOWHL
It took me a couple tries to get the dimensions correct. Good luck and enjoy the RCAs (=.
Will
Edit: I'm using Solidworks 2010 x64 so if you're using an older version then I don't know how to help you.
http://www.megaupload.com/?d=RCIZOWHL
It took me a couple tries to get the dimensions correct. Good luck and enjoy the RCAs (=.
Will
Edit: I'm using Solidworks 2010 x64 so if you're using an older version then I don't know how to help you.
Last edited by Agent0024; 08-29-11 at 11:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
cutecboy
LS460 / 430 / 400 / 600h Classifieds
49
04-07-04 03:09 PM