Lowering my IS2 on 20's.....what mods are needed??
#1
Lowering my IS2 on 20's.....what mods are needed??
So i will be lowering my 250 not awd, on 20 inch Vertini Fairladys with the Road Magnet springs which I know give a 2" inch drop... just need to know what I will need to do after this lowering process is done... etc roll the fenders camber adjustment... anything special...
wheels are in the front 20" x 8.5" with a 25 offset
and rear will be
20" x 10" with a a 35 offset
need to know what size tires to run also..
wheels are in the front 20" x 8.5" with a 25 offset
and rear will be
20" x 10" with a a 35 offset
need to know what size tires to run also..
#4
Driver School Candidate
Join Date: Jul 2011
Location: FL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
you will need no mods except rolling the back fender mabye i was running 20x10.5 in the back an 20x8.5 in the fronts lowerd about 2 inch an didnt effect anything but then i went alot lower an cut the fenders an all that
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post