Welcome to Club Lexus, the world's largest and most active online community of Lexus owners and enthusiasts.
You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Club Lexus community today (click here to register)!
Lowered on nf210's w/tt wheels now I need a spacer?
Drop looks good but it makes the offset look wrong and the 275's look small so any recomendations on spacers?
Thanks!
This ad is not displayed to registered members. Register your free account today and become a member on Club Lexus!
__________________
1994 supra 6spd 612whp pump gas
1997 RSP/black sc400 (1jzgte,BWS366& supporting mods on aristo trans and wire harness, built auto all under way)
stock tt wheels, I am not 100% sure of the specs 8.5 front 9.5 rear 17in and can't remember the offset.
__________________
1994 supra 6spd 612whp pump gas
1997 RSP/black sc400 (1jzgte,BWS366& supporting mods on aristo trans and wire harness, built auto all under way)
I just went with the H&R 20mm spacer kit. You will need to run extended studs with that kit, unless you want to go the KICS route, where it has bolt-on spacers. But they are not hub-centric like the H&R.
You were on stock tt wheels with this set up? Although I have never used a spacer before hubcentric is a must so where would I look for this kit? Is this just rear or both front and rear?
__________________
1994 supra 6spd 612whp pump gas
1997 RSP/black sc400 (1jzgte,BWS366& supporting mods on aristo trans and wire harness, built auto all under way)
I just went with the H&R 20mm spacer kit. You will need to run extended studs with that kit, unless you want to go the KICS route, where it has bolt-on spacers. But they are not hub-centric like the H&R.
20mm all around?
__________________
1994 supra 6spd 612whp pump gas
1997 RSP/black sc400 (1jzgte,BWS366& supporting mods on aristo trans and wire harness, built auto all under way)
20mm on the rears, but thats for my wheels. You need to look at the way your car sits with the wheels you have. get directly behind it and look, also look how far inset the very top of the wheel is from the fender and either measure or make an educated guess.
__________________
1994 supra 6spd 612whp pump gas
1997 RSP/black sc400 (1jzgte,BWS366& supporting mods on aristo trans and wire harness, built auto all under way)