Welcome to Club Lexus, the world's largest and most active online community of Lexus owners and enthusiasts.
You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Club Lexus community today (click here to register)!
it said that the shocks will fit a '93 supra, so i ordered these for my '92 SC3. I recieved them and installed the fronts with no problem.
Today when i opened the other 2 boxes to look at the rear shocks....i realized that the bottom mounting point isen't even forked like the sc300 shocks!! wtF??! What did i do wrong? i thought 93+ Supra shocks fit on all years of the SC300???
I also bought some 93-98 Supra lowering springs and notticed that the bottom half of the rear springs is narrower than the mounting plate.
can anyone tell me why this happened? my car's on jackstands right now, and i'm stumped.
This ad is not displayed to registered members. Register your free account today and become a member on Club Lexus!
The ad lists the 93 year by mistake or it could be that they included the 93 as a mark3 Supra because the mark4 came out in 93.5/94. They are clearly for a mark3 Supra as they do not even make kyb gr2 for 93.5/94-98 Supra.
__________________ Electronic Dance Music Thread
05 Scion XB
99 Accord Coupe 5 speed - Sold on 3/28/2013
93 Black Onyx JZS147 - Sold on 9/12/2012
93 Diamond White Pearl JZZ31 - RIP on 09/02/2009
what everyone else said..you ordered them for the wrong year..
LEX MAN, I am sure you can use the MK3 Supra fronts, there was another member here a while back that posted up the same EXACT issue as this and he kept the front shocks, and just ordered new rears for the MK4..so he was running MK3 front shocks with MK4 springs all around and MK4 rear shocks.
LS1 5.7, T-56 6-speed trans, DGR Fabrication motor mounts, PSI Conversion LSx harness, F-body 3'' aluminum driveshaft, Tuned By Frost PCM, Mishimoto Supra Radiator/Shroud/Fans, QuickCar fused switch panel, Full custom Speedhut dash cluster/gauge setup, gutted and caged. Coming soon, Borg Warner S475, 5'' downpipe, water/meth injection, 90+lb/hr Injector clinic injectors, custom TSP blower cam, and more
i don't think mk4 rear shocks/struts will fit the SC300 unless you have the mk4 springs b/c i have mk4 springs that i wasn't aware of at first and ordered some SC300 shocks/struts. the front fits fine but the mk4 springs in the rear didn't line up w/ the SC300 shocks/struts. i was just like ***** it, so now i've been running it like that for over 2 years now lol...