98$c300

I did use the search button already and found nothing.has anyone used the LRD bracket for ZR1 calipers or CTS-V calipers?

scENFORCER

So I'm fairly certain these will fit under my 18" +42 GT-C's, but from the sounds of it they wouldn't fit under Supra TT's? That's the only thing holding me back from doing this mod, since my TT's are my winter wheels. Unless someone can prove me wrong?

czar07

the ISF rotors are 360mm. I dont think they will fit underneath 17s

scENFORCER

^ hmm didnt think so. Looks like I'll be looking into TT breaks. Thanks!

Blkexcoupe

iTrader: (8)

Yeah, the IS-F uses 19" wheels stock because it has to. Depending on the design of your 18" wheel it might not even be able to clear these brakes. 17's won't clear for sure.

czar07

Based off some research it seems that 1 piece type 18in wheels (TE37 typre stuff) will fit over the IS-F brakes. Supra front wheels wont fit the front brakes. Rears should be ok though?

scENFORCER

What if I traded my TT's for some 18" ISX50 wheels? Anyone know if they will fit under these 18's? They should, right?

CalitriSC

iTrader: (13)

Yes 18" IS 250/350 stock wheels clear. I have used them on my ISF before. There are several 18"s that will clear.

scENFORCER

Awesome! Thanks! Looks like I'll be trading my TT's for some IS wheels

SCereal

iTrader: (4)

Are the ISF calipers the same size as the Z06 ones? They're pretty beefy and the challenge seems to be not in the diameter but the clearance of the spokes. I've always had the CCWs which clear by a good margin but I've never seen ISX50 wheels off the car. I measured my setup for a member a while back and the distance from the rotor face to the edge of the caliper is right at 2 3/8" and the distance between the rotor face and the hub mating surface was 1.25" so if your wheels have ~1.25" clearance between the mating surface and the back of the spokes, you should be ok.

scENFORCER

^ perfect, those are exactly the numbers I need to check. Gotta make sure these will fit my Volks and the IS wheels. Thanks!

DiozKhan

Wow this looks pretty awesome, I need to get my hands on these brackets!

scENFORCER

I just created a WTB thread for these brackets. If anyone has a set or knows anyone that does, please PM me!

ngoway

Has anyone tried to fit the XXR 521s over these guys yet?

*edit* before anyone bashes on XXRs, I like their cost factor and the fact that I won't flinch or think twice when they get dinged up or curbed.

97-SC300

iTrader: (17)

Anyone know of this will clear the 18 inch ccw classic wheels they are a 3 piece wheel. They clear the ls400 calipers and supra calipers. Not sure on this setup. Would like to know before I buy these