Who actually has the "gixxer_drew" Bilstein / Hypercoil setup?
#1
Who actually has the "gixxer_drew" Bilstein / Hypercoil setup?
I am wondering if anyone here has them on their SC and had any comments on them. Pics of how low you are too would be nice. I think I am going to order parts in the next few days.
It says a good range on these coilovers is 1" - 1.5" lowering. That means about 2" on the SC. So they should give me a decent range with great performance and ride.
If no one knows what I talking about this is the link
http://www.supraforums.com/forum/sho...light=bilstein
Let me know what you think of them!
Matt
It says a good range on these coilovers is 1" - 1.5" lowering. That means about 2" on the SC. So they should give me a decent range with great performance and ride.
If no one knows what I talking about this is the link
http://www.supraforums.com/forum/sho...light=bilstein
Let me know what you think of them!
Matt
#3
Lexus Test Driver
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
I'm using Drew's cheaper recommendation for the sc300; supra TT oem spring with Bilsten HD (supra TT model) shocks using upper c-clip groove on the rear shocks and lower c-clip groove for the front shocks. I'll report my findings on my website after I've put some more mileage on them. If the springs don't suffice, I'll get the bilstein sleeves and newer Hypercoil OBD springs .
Trending Topics
#8
300 is what they can do. 250 is below their standards. I will be okay with them. A few people have used the 300's on the rear with no problem. I needed the stiffer rate for my stance in the rear. Anything softer will be rubbing.
Last edited by RedPhoenix; 02-16-08 at 07:58 AM.