vwynn

iTrader: (4)

anyone used them before?

reliable?

reason why im asking.. is because my brakes NEED to be changed.. i mean NEED.. reason being.. my rears.. the low pad indicator is grinding in the rotor now =p and yea.. i now know i need a brake job..

so yea..

http://cgi.ebay.com/ebaymotors/1992-...mZ190175180513

looked at that..

price seems good..

also the company has a booth at eibach meets.. and is a sponsor of honda-tech.. (dont flame me cuz i said honda...)

also on the front page it has a SC!! =D

http://www.youtube.com/watch?v=6D9ohTAVe6U


they also have a vid too..

CCC-TT

iTrader: (1)

ya, i think someone told me that almost all ebay rotors are supplied by the same company

TheMole

iTrader: (13)

I have a pair of front rotors from them on my car right now and they are working fine. Although, one of the pads I got from them was missing the tiny hole where the pad springs would fit into. I just ended up using one of the springs. I would double check this if you are getting pads as well.

jgdynamics

iTrader: (16)

yea the shop is like 5 mins from my house, tha guy that runs it is pretty cool... iv ordered different rotors from him before like brembo blanks and mountains etc.

GREED777

I have them on my GS, and haven't had any issues. The only thing I was a little dissapointed with was that the powdercoating didn't last very long. I was showing signs of rust within a matter of weeks. This may be the case with all powdercoated rotors, but this was my first set. I did paint them and clear coat them and they've held up very well.

ChronoJ1

iTrader: (2)

Why not go with slotted brembos? They are cheaper and you know they are quality too.

vwynn

iTrader: (4)

cheaper??? got link? im prolly going to get this set of 4 rotor n pads today tho.. since my car NEEDS brakes haha.

so.. $205 (org price + tax) for... 4 D/S rotors ( 2 F + 2 R ) + Brake pads for all 4 corners (semi metallic)

on top of that warentee too.. for cracking.. which is good cuz i heard drilled brakes tend to crack often so.. =p

but yea. link to cheaper slotted brembos wouldnt hurt for other peeps that want new rotors..

Greed777: what type of paint + clear did u use? i heard 88 uses high temp paint on their rotors on Honda-tech forum...but then again i got a response from them saying they power coat it...

GREED777

I used black brake caliper paint by VHT and Dupli-Colors engine enamel for the clear. It has held up very well. I was told that they were powder coated as well, it just didn't hold up very long.

vwynn

iTrader: (4)

Do you need a clear coat?

GREED777

I recommend it, I have alway used it. Alot of rotors and calipers that I have seen that don't use it tend to wear and fade rather quickly. I have never had to re-paint mine and they still look brand new and freshly painted.

fwynn

iTrader: (1)

hmm i buoght 1200 black hi temp (1200 degrees F)
and 500 clear coat (they only had that)

will that still work?

eliteskill

iTrader: (8)

the guy who runs it had a sc300 before he bought his nsx.. good guy.. i bought my set from him.. but they rusted after the first 2 weeks.. you really need to high temp paint them... 500 degrees + should be ok

jdmae86

I have front and rear rotors from this guy... but there on my other toyota(ae86)
& ive had zero problems. they been on that car for a couple yrs now

fwynn

iTrader: (1)

aite the rotors have been
painted and cleared..

all nice n shiny :]

going to install the brakes today after school!!
hopefully everything works out..

its raining like no other right now..

GREED777

nice, you should be in good shape. good luck