Oklahoma City Lexus Performance work
08-04-11, 10:15 AM
#1
Pole Position
Thread Starter
Join Date: May 2011
Location: OK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Oklahoma City Lexus Performance work
anyone know a good shop in oklahoma city to work on my ISF, i need headers put on and i have found two speed shops, one Hyperspeed motorsports out of Yukon, and 1% Motorsports out of Edmond, both shops look like they know what they are doing, but I'm hoping to find any alternatives, or if you've heard good or bad things about these places 
Thanks OKC
Thanks OKC
08-06-11, 09:47 PM
#2
Hyperspeed Motorsports is your best bet. They've done a lot of work on my SC and they've built some of the baddest Supras in Oklahoma. They've been really busy lately working on a few Supras and haven't had time to work on anything else yet.
1% is also good as well. I've heard their prices were a little high, but they do great work. Hyperspeed does excellent work and their prices are cheap.
1% is also good as well. I've heard their prices were a little high, but they do great work. Hyperspeed does excellent work and their prices are cheap.
08-09-11, 02:42 PM
#3
Pole Position
Thread Starter
Join Date: May 2011
Location: OK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
yea i got quotes from both, and they were oppisite which was weird, both quoted on the "high side" and Hyperspeed came in at 200 dollars more expensive, but it might have been because they were so busy. Son was really cool though, and even offer to refer me to a place in Norman if i didn't wanna wait.
08-14-11, 07:22 AM
#4
I figured Hyperspeed would be cheaper? Son is a really good guy though. There is a place in Norman called Fasking Performance. They're pretty good as well from what I've heard.
Are you near the Edmond area? I've got a friend who might be able to help.
Are you near the Edmond area? I've got a friend who might be able to help.
) on north penn
Trending Topics
09-19-11, 07:30 AM
#10
Pole Position
Thread Starter
Join Date: May 2011
Location: OK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
i just got the drivers side header back the other day, PPE said some people had some rubbing issues so they proactively sent me a new one. But most places are judging off time and saying about 850-1000 dollars on estimate (in okc). but i've seen anywhere from 700-1000 on the boards
09-22-11, 09:02 AM
#13
Pole Position
Thread Starter
Join Date: May 2011
Location: OK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
we were just up there for a Toyota/ Lexus meetup, and i saw a red one on the way to the Dyno. heh
BTW i dyno'd the ISF and in Tulsa that day it was putting down 360rwhp . with the Joe Z Exhaust/ intake
BTW i dyno'd the ISF and in Tulsa that day it was putting down 360rwhp . with the Joe Z Exhaust/ intake
09-22-11, 02:25 PM
#14
Driver School Candidate
I wish i would have known! I have only seen a small handful of other F's in TULSA! Would love to street race another F just for kicks! ;-) Good work on the dyno... Dont think I could let my baby be hooked up. I would be scared! Ha! What color is yours? Hope you enjoyed your time in Tulsa!
