AZTurbo

iTrader: (10)

Thanks! Well, I haven't had my Lexus that long so it is still in the works. I am currently gathering parts to turbocharge the IS300. I am hoping to have it boosted this fall.

twestman

Wooowww.... I love the xB. The fitment of your SSR's on the IS is absolutely spot-on! What all have you gathered for your turbo build and who will be doing the install? What turbo are you going with?

AZTurbo

iTrader: (10)

Thank you!

I have the intercooler and mainfold on the way so far. Cheap CX Racing, but I will have the manifold HPC coated.

I would like to run a Garrett GT37, but they are only available with a T3 turbine housing so I am thinking of running a Garrett GT40 with a ball bearing center section. I will be doing all of the work myself. I am planning on producing 350-400 with an everyday tune with a stock block, thicker head gasket, stand alone engine management and 720-960cc injectors. I am undecided on the engine management, but I have AEM EMS and Haltech in mind at this time. I plan on building a block later and eventually doing the Supra TT Getrag 6 Speed tranny swap.

Kaiser

iTrader: (1)

A ball bearing TO4S will get you easily over 400 wheels at 18psi with some good low end power. You can even get a GT35R with a T4 turbine and make good power.

On these motors it's fairly close to 1cc per hp to figure their max. I was daily driving at 400 wheels on JDM 440's for a long time but near maxing them out. So unless you are planning 7 to 900hp, you could tone down the injector choice for a better idle. 550's might be a better choice and cheaper.

Kyoei

1999 LS400 UCF20

Picture1


Picture 2


Engine/Drivetrain:
-Stock

Body/Exterior:
-Toyota Celsior Window Visor
-JP USA lip spoiler (coming soon, need paint)
-Atio Front Grille

Suspension:
-Tanabe Sustech Pro NF
-SS kit

Wheels/tires:
-Work Varianza D3S (20x9+38, 20x10+35)
-Ichiba Spacer 15mm in Front 20mm in Rear
-Falken FK-452 (F235/30-20, R245/30-20)

Interior/Audio:
-Panasonic DVD player w/ Beatsonic adapter
-K-Break Front table with Sake
-Lxuer 1 LED Dome Lights
-Luixs Crystal Shift ****
-Bellezza Black Curtain
-JP Kintuna & Fusa
-JP Neck Pads

Miscellaneous:
-JDM Driver

mex lex

iTrader: (4)

2002 Lexus GS300

Engine/Drivetrain:
-Tanabe Hyper Medallion Touring Cat Back
-Other bolt-ons

Body/Exterior:
-JP Roof Spoiler
-TOM'S V300 Rear Lower Spoiler
-Mobile HID 4300K
-Luxer 1 LED Bulbs
-Painted Stock Front Grill

Suspension:
-UAS kit
-KYB GR-2 Shocks
-Daizen Control Arm Bushings
-Intrax Sway Bar-Coming Soon
-More Suspension Coming Soon

Wheels/tires:
-MRR HR1 (20x9.5 +38 all around)
-H&R 25mm Spacer Adaptor rear and 8mm Spacer front
-Falken FK-452 (F245/30-20, R245/30-20)

Interior/Audio:
-Pioneer DVD player
-Pioneer 12" Sub 1000 watt
-Majestic 600 watt Amp
-Custom Box
-Lxuer 1 LED Dome Lights
-Bellezza Beige Curtain
-Belleza Neck Pads
-Belleza Beige Tissue Box Cover

Miscellaneous:

twestman

Pics! Pics! lol

jhill20

iTrader: (1)

Not the greatest pics but since Jin asked so nicely, here goes

Engine/Drivetrain:
-Magna flow mufflers, no resonators...catback

Body/Exterior:
-Black Painted Roof
-Sonar LED Tails
-Unknown 6000k lowbeam HID
-Unknown 6000k Fog HID
-Kazz Sports "mercedes" grill (looking for a new home)
-Trunk Fab To Come Shortly, Inner Tails and Wing removal

Suspension:
-Eibach Pro Kit
-KYB GR-2 Shocks

Wheels/tires:
-Lowenhart BR5 silver w/ chrome lip 20x9 and 20x10 both+37
-Falken FK-452 255/35zr20
-Nankang UltraSport NS-II 285/30zr20

Interior/Audio:
-Suede Headliner
-Alpine IVA-W200 w/ BT-100 bluetooth adapter
-12" Kicker LS7 in a custom fiberglass enclosure

Miscellaneous:
-bags and spacers to come

aristo123

iTrader: (3)

^^^thats wuts up! maricopa on the map. lol

livinitup7

What's up guys...here's my almost stock 350...







Engine/Drivetrain: Stock for now
Body/Exterior: GFX kit, redouts
Suspension: Stock for now
Wheels/Tires (include offsets if known): Upgraded 18" oem
Interior/Audio: XM hardwired in glovebox
Miscellaneous: If anyone needs an 8.1, lmk

jhill20

iTrader: (1)

looks clean! love the front lip.

I8ABMR

heres my baby

aristo123

iTrader: (3)

Not a whole lot of mods yet but ill get there. I recently sold my fully modded integra and picked up this stock is300.

Mods: Ksport coilover
works bell hub
Nardi deep dish steering wheel
Wheels: 18x8 18x9 33 offset weds kranze er-m
215/40/18 F 235/40/18 R toyo proxes

twestman

Nice... Looks good! Get those wheels mounted!

rudedog35

iTrader: (1)

now that is some serious closeness!