F/S: 1996 ES300 Heads
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2002
Location: Missouri
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
F/S: 1996 ES300 Heads
These are out of a '96 (1MZFE) with 80k miles on it. The engine was run low on oil and seized. I have pics if anyone is interested, and most of the rest of the engine.
If anyone has any motor projects at present or in the future, maybe you could use these. I can throw in the stock cams as well if you'd like.
$200+shipping for the pair. I have very little in the motor, mostly just my time so I'm not asking much for them.
If anyone has any motor projects at present or in the future, maybe you could use these. I can throw in the stock cams as well if you'd like.
$200+shipping for the pair. I have very little in the motor, mostly just my time so I'm not asking much for them.
Last edited by VQ Driver; 01-02-04 at 05:38 PM.
#2
Driver School Candidate
Thread Starter
Join Date: Apr 2002
Location: Missouri
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I looked these up on www.car-part.com and they're running right around $300 per side . I don't want anyone to think this falls under "If it sounds to good to be true, it probably is". I'm just trying to get some parts to people that can use them rather than them sitting in my shop collecting dust.
I'll see if I can get the pics up on my cardomain site tonight so anyone can see them.
I'll see if I can get the pics up on my cardomain site tonight so anyone can see them.
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2002
Location: Missouri
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
semlin
ES - 1st to 4th Gen (1990-2006)
1
02-09-15 03:45 PM