AZ Fs: D2forged wheels/tires 20" for IS250 IS350 IS-F
#1
Driver School Candidate
Thread Starter
iTrader: (4)
Join Date: Apr 2007
Location: AZ
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Fs: D2forged wheels/tires 20" for IS250 IS350 IS-F
*** UPDATED - I tried to measure for offset but don't believe my numbers are right as I can't measure true wheel width (wheel centerline) with the tires mounted. I was able to measure backspacking.
Front: 5" backspacing
Rear: 8 1/4" backspacing
I also tried these wheels on my wife's 07 IS350 (lowered on Eibach springs) and they seem to fit just fine. I see no reason why these won't work on RWD IS250 and IS350's. Pictures are at the bottom of this post and my newest reply. ***
*** UPDATED - Shipped price is now $4450 to the lower 48 states. Any other location, please request a shipping quote. Also, will accept PAYPAL if buyer does transaction as gift (no fees) or if buyer pays fee. ***
Hi there. I just sold my 2008 ISF and now I need to sell my tires/wheels. I’m in Phoenix, Arizona (I17 & 101)
OneSiCkF will be in shortly to vouch for me.
Wheels are D2FORGED VS5’s with satin black face/center caps. Hardware is color matched Ultrasonic blue. Barrels are shadow chrome. No scuffs, scratches, dings or flaws.
Front 20x9.5, 2” lip
Rear 20x11, 3” lip
Lug pattern is 5x114.3.
Backspacing/offset is proprietary to D2FORGED. These are made specifically for the ISF.
Tires are Vredestein Ultrac Sessanta.
Front 255/30/ZR20 XL
Rear 295/25/ZR20 XL
D2FORGED recommends a slight fender roll in the rear to run these. I had it done for $60 here in Tempe, AZ without issue.
These were on the car for just under a year and about 4-5k miles. They are mounted, balanced and ready to run. Tread is great.
TPMS sensors are not included/mounted with the wheels.
Included are two sets of Rays black lug nuts with locks.
Hardware can be changed to a different color through D2FORGED if desired.
Here are a couple of pictures. More can be seen at my photobucket album below.
http://s512.photobucket.com/albums/t...SF%20D2FORGED/
I’m told by D2FORGED that this setup now is over $8k new.
If shipped, they will be professionally boxed/shipped by a local tire/wheel company I’ve used before. Payment accepted would be money order, cashier’s check or personal check (would have to clear before pickup/shipment). Will accept PAYPAL if buyer does transaction as gift (no fees) or if buyer pays fee.Let me know if you’re interested via phone/email/pm.
Thank you,
Jeff Nobbe
623-523-3203 cell
kingpinracing@gmail.com
Front: 5" backspacing
Rear: 8 1/4" backspacing
I also tried these wheels on my wife's 07 IS350 (lowered on Eibach springs) and they seem to fit just fine. I see no reason why these won't work on RWD IS250 and IS350's. Pictures are at the bottom of this post and my newest reply. ***
*** UPDATED - Shipped price is now $4450 to the lower 48 states. Any other location, please request a shipping quote. Also, will accept PAYPAL if buyer does transaction as gift (no fees) or if buyer pays fee. ***
Hi there. I just sold my 2008 ISF and now I need to sell my tires/wheels. I’m in Phoenix, Arizona (I17 & 101)
OneSiCkF will be in shortly to vouch for me.
Wheels are D2FORGED VS5’s with satin black face/center caps. Hardware is color matched Ultrasonic blue. Barrels are shadow chrome. No scuffs, scratches, dings or flaws.
Front 20x9.5, 2” lip
Rear 20x11, 3” lip
Lug pattern is 5x114.3.
Backspacing/offset is proprietary to D2FORGED. These are made specifically for the ISF.
Tires are Vredestein Ultrac Sessanta.
Front 255/30/ZR20 XL
Rear 295/25/ZR20 XL
D2FORGED recommends a slight fender roll in the rear to run these. I had it done for $60 here in Tempe, AZ without issue.
These were on the car for just under a year and about 4-5k miles. They are mounted, balanced and ready to run. Tread is great.
TPMS sensors are not included/mounted with the wheels.
Included are two sets of Rays black lug nuts with locks.
Hardware can be changed to a different color through D2FORGED if desired.
Here are a couple of pictures. More can be seen at my photobucket album below.
http://s512.photobucket.com/albums/t...SF%20D2FORGED/
I’m told by D2FORGED that this setup now is over $8k new.
If shipped, they will be professionally boxed/shipped by a local tire/wheel company I’ve used before. Payment accepted would be money order, cashier’s check or personal check (would have to clear before pickup/shipment). Will accept PAYPAL if buyer does transaction as gift (no fees) or if buyer pays fee.Let me know if you’re interested via phone/email/pm.
Thank you,
Jeff Nobbe
623-523-3203 cell
kingpinracing@gmail.com
Last edited by JUGRNOT; 05-22-11 at 12:47 PM. Reason: updated backspacing and fitment
#3
Lead Lap
iTrader: (9)
Join Date: Dec 2009
Location: Socal
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
I vouch for Jeff. This guy is as honest and legit as can be. I have known Jeff for a few years now and have recently bought his JoeZ exhaust off of him. This guy couldn't have packaged up the exhaust anymore secure than he did. Mods please pm me if there are any issues. BTW he will accept paypal if you are serious about purchasing his items..
Trending Topics
#13
Driver School Candidate
Thread Starter
iTrader: (4)
Join Date: Apr 2007
Location: AZ
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Updated shipped price to $4450 to the lower 48 states. Any other location please contact me for shipping quote. Also, will accept Paypa if buyer does transaction as a gift (no fees) or if buyer pays fee.
thanks, Jeff
thanks, Jeff