Go Back   Club Lexus Forums > Search Forums
Sign in using an external account
Register Forgot Password?

Showing results 1 to 25 of 274
Search took 0.11 seconds.
Search: Posts Made By: ttaylor993
Forum: GS - Second Generation 09-13-14, 05:50 PM
Replies: 7
Views: 289
Posted By ttaylor993
I'd try the salvage yards for a part like that. ...

I'd try the salvage yards for a part like that. Should be really cheap.
Forum: GS - Second Generation 09-08-14, 10:05 PM
Replies: 25
Views: 896
Posted By ttaylor993
You have to take the timing belt off to get to...

You have to take the timing belt off to get to the water pump. The recommended interval for the timing belt is 90k. But, like 02SDGS said, you may as well replace it while you're in there. It's a...
Forum: GS - Second Generation 09-06-14, 08:34 PM
Replies: 16
Views: 439
Posted By ttaylor993
Once you rule about the battery, if it still...

Once you rule about the battery, if it still doesn't crank, check the starter relay. If that's ok or you replace it and it still doesn't crank check the neutral safety switch. Put the car in neutral,...
Forum: GS - Second Generation 09-06-14, 02:29 AM
Replies: 8
Views: 259
Posted By ttaylor993
I don't think unplugging the negative lead rather...

I don't think unplugging the negative lead rather than the positive was a mistake. However, sometimes you can't look at a fuse and tell if its blown. Change the fuse and the relay. Lastly, I don't...
Forum: GS - Second Generation 09-06-14, 02:13 AM
Replies: 5
Views: 228
Posted By ttaylor993
The leaks you are describing all sound like valve...

The leaks you are describing all sound like valve cover gasket leaks. Did you torque it down to specs and in the right sequence? Over-tightening and tightening out-of-sequence will cause a valve...
Forum: GS - Second Generation 09-06-14, 01:34 AM
Replies: 20
Views: 1,460
Posted By ttaylor993
I have never heard of this problem before. But,...

I have never heard of this problem before. But, if you are going thru pulleys like that, then I would think that it is something related to the crank itself. There is a rectangular key that fits into...
Forum: GS - Second Generation 09-04-14, 09:59 PM
Replies: 16
Views: 487
Posted By ttaylor993
What about the water pump? When was it last...

What about the water pump? When was it last changed? Sometimes when they go bad you will hear a metal-on-metal sound as the impeller wobbles inside the housing as it spins.
Forum: GS - Second Generation 09-01-14, 06:35 PM
Replies: 72
Views: 20,397
Posted By ttaylor993
Don't laugh! I still got my OEM with cassette too.

Don't laugh! I still got my OEM with cassette too.
Forum: GS - Second Generation 09-01-14, 05:50 PM
Replies: 7
Views: 325
Posted By ttaylor993
I've never heard of bypassing the canister....

I've never heard of bypassing the canister. Although, I am sure that some one with enough ingenuity could figure out a way to do. But, before I go that route I'd check for loose or leaky hoses and a...
Forum: GS - Second Generation 08-27-14, 06:48 PM
Replies: 16
Views: 486
Posted By ttaylor993
When was the last time the plugs and wires were...

When was the last time the plugs and wires were changed. Could be either of these. Also, if your valve cover gaskets are leaking, the oil can collect in the plug valley and cause the plugs to miss....
Forum: GS - Second Generation 08-26-14, 07:14 PM
Replies: 25
Views: 896
Posted By ttaylor993
You are absolutely right, the Toyota dealer...

You are absolutely right, the Toyota dealer should work just fine. Sounds like the water pump to me too.
Forum: Performance 08-23-14, 07:19 PM
Replies: 1
Views: 129
Posted By ttaylor993
Are you sure which seals are leaking? Since oil...

Are you sure which seals are leaking? Since oil from the cam seals and the VVT-i pulley at the top of the engine will settle at the bottom just at the crank seal, the crank seal may not be leaking,...
Forum: GS - Second Generation 08-15-14, 06:28 PM
Replies: 7
Views: 288
Posted By ttaylor993
You'll have to take the intake tubing and...

You'll have to take the intake tubing and throttle body off. If memory serves me correctly you shouldn't need much more than a 10mm and 12mm socket. I used deep sockets. I'd have screw drivers handy...
Forum: GS - Second Generation 08-11-14, 07:27 PM
Replies: 12
Views: 544
Posted By ttaylor993
I was thinking the exact same thing myself. My...

I was thinking the exact same thing myself. My carpet looks awful. I'll give it a shot now that someone else has tried it and it seems ok. Why would we need to sew it back in if we didn't have to...
Forum: GS - Second Generation 08-11-14, 07:18 PM
Replies: 20
Views: 452
Posted By ttaylor993
Looks like the valve cover gasket to me too. Here...

Looks like the valve cover gasket to me too. Here is a DIY video.

http://www.youtube.com/watch?v=xpAyG0JVM5A
Forum: GS - Second Generation 08-11-14, 06:52 PM
Replies: 3
Views: 257
Posted By ttaylor993
Ditto! valve cover gaskets and/or VVT-i pulley....

Ditto! valve cover gaskets and/or VVT-i pulley. Maybe the cams seals as well.
Forum: GS - Second Generation 08-10-14, 09:26 PM
Replies: 19
Views: 780
Posted By ttaylor993
You know we really serious 'bout our 2nd Gens,...

You know we really serious 'bout our 2nd Gens, lol!
Forum: GS - Second Generation 08-09-14, 08:05 PM
Replies: 19
Views: 780
Posted By ttaylor993
I am not understanding that logic. It's kinda...

I am not understanding that logic. It's kinda like saying I want to turn my ABS off for fear of it breaking. The reason you have TC, ABS, etc. on is for those times when UNEXPECTED things happen. If...
Forum: Suspension and Brakes 08-09-14, 07:49 PM
Replies: 11
Views: 487
Posted By ttaylor993
I don't know what's going on here. I have ordered...

I don't know what's going on here. I have ordered products from RockAuto a few times before. I have never had any problems. Most recently ordered tie rod ends and lower ball joints for my GS300. This...
Forum: GS - Second Generation 08-08-14, 07:39 PM
Replies: 32
Views: 1,074
Posted By ttaylor993
I would tend to agree with you that it must be...

I would tend to agree with you that it must be the gas. Although I have used lower grade octane gas in my 300 with now issues whatsoever.
Forum: GS - Second Generation 08-07-14, 08:42 PM
Replies: 74
Views: 4,073
Posted By ttaylor993
2jzs don't usually need a water pump, or front or...

2jzs don't usually need a water pump, or front or rear main seal at 100k. The cam seals and VVT-i pulley, maybe. It's just that if you are in the engine changing the timing belt for the 90k service,...
Forum: GS - Second Generation 08-07-14, 07:47 PM
Replies: 697
Views: 47,252
Posted By ttaylor993
I am pretty sure they were all new OEM parts. The...

I am pretty sure they were all new OEM parts. The WP was Aisin and other parts came in Toyota packaging. They all had OE part numbers. Here is a copy of the invoice.
Forum: GS - Second Generation 08-06-14, 07:23 PM
Replies: 17
Views: 429
Posted By ttaylor993
Don't know, I'm open for suggestions. I'll check...

Don't know, I'm open for suggestions. I'll check out the 80PRS myself to see how I like it.
Forum: GS - Second Generation 08-05-14, 08:58 PM
Replies: 697
Views: 47,252
Posted By ttaylor993
I found an OEM timing belt/water pump kit on eBay...

I found an OEM timing belt/water pump kit on eBay that was pretty complete. It included the TB, WP, WP O-rings, accessory belt, TB tensioner, 2 cam seals, one crank seal, both left and right valve...
Forum: GS - Second Generation 08-05-14, 08:44 PM
Replies: 17
Views: 429
Posted By ttaylor993
Welcome to the club. Glad you brought up modding...

Welcome to the club. Glad you brought up modding the sound system. I've been putting off doing mine for months now. Seeing your post made me get off the stick. Going to look at a Pioneer tomorrow.
Showing results 1 to 25 of 274

 
Forum Jump
All times are GMT -7. The time now is 01:39 AM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info