Club Lexus Forums - Search Results

Log In 

Showing results 1 to 25 of 453
Search took 0.45 seconds.
Search: Posts Made By: fried_rice
Forum: Performance & Maintenance 04-09-16, 07:21 AM
Replies: 35
Views: 1,269
Posted By fried_rice
MAP-ECU or any other piggyback will not run well...

MAP-ECU or any other piggyback will not run well with Karmen vortex, which is what the stock 2JZ-GE ECU is. That is why when doing NA-T, I switch to the GTE ECU, Ali SC3 has the write-up, and at the...
Forum: Performance & Maintenance 04-05-16, 05:26 PM
Replies: 62
Views: 21,442
Posted By fried_rice
I talked to a local guy, he said he's making...

I talked to a local guy, he said he's making 1000hp in his turbo Mustang on the stock T56 Magnum. On the Facebook page it says they're shifting at 10k RPM and the level 5 can hold 1600hp. ...
Forum: Performance & Maintenance 04-05-16, 05:54 AM
Replies: 62
Views: 21,442
Posted By fried_rice
Yes, I used the stock aluminum F-body T56...

Yes, I used the stock aluminum F-body T56 Driveshaft with a bolt-on adapter for the differential. This was with the LS1/T56, but the transmission output should be in the same location if it lines up...
Forum: Performance & Maintenance 04-02-16, 10:06 AM
Replies: 62
Views: 21,442
Posted By fried_rice
Awesome, they cast their bellhousing, Only $599...

Awesome, they cast their bellhousing, Only $599 for it. Nice to know as I have a T56 sitting in the garage if I ever decide to do another 2JZ race-car would definitely go this route. The F-body...
Forum: Performance & Maintenance 04-02-16, 05:54 AM
Replies: 35
Views: 1,269
Posted By fried_rice
I ran the old style 1000's on the Supra in the...

I ran the old style 1000's on the Supra in the video with MAP-ECU-3. It ran on 93 octane, but had some tip in problems and idled at 13AFR, ran pretty well on E85. I've also ran Bosch 900cc's (ID1000...
Forum: SC400 / 300 Classifieds 04-01-16, 10:54 AM
Replies: 6
Views: 2,514
Posted By fried_rice
^ Thanks I'll get with you this weekend, been a...

^ Thanks I'll get with you this weekend, been a busy as of late.

Deputy, PM'd you the other day.
Forum: SC400 / 300 Classifieds 03-31-16, 06:09 AM
Replies: 6
Views: 2,514
Posted By fried_rice
I would prefer the bellhousing, but maybe we can...

I would prefer the bellhousing, but maybe we can work something out, thanks!
Forum: Performance & Maintenance 03-28-16, 06:56 PM
Replies: 12
Views: 968
Posted By fried_rice
The IACV is on the top right of the second...

The IACV is on the top right of the second picture.

http://cimg1.ibsrv.net/gimg/www.clublexus.com-vbulletin/500x375/80-s_l500_8b37ce6b32b50cc470baf95a446029afd1131b31.jpg

The 1JZ is different,...
Forum: SC400 / 300 Classifieds 03-28-16, 04:33 PM
Replies: 6
Views: 2,514
Posted By fried_rice
WTB: TT Auto LSD,TT Auto Flexplate, TT auto transmissions

I'm looking for the following.

Willing to pay cash or trade for performance parts I have.

-Aristo/Supra/etc GTE-non-vvti A340e, in the $150-200 range (prefer local)
Forum: Performance & Maintenance 03-28-16, 08:23 AM
Replies: 35
Views: 1,269
Posted By fried_rice
The stock ECU will always run in closed loop even...

The stock ECU will always run in closed loop even if it's unplugged. It will try to use the stock narrowband sensor to try to maintain 14.7 idle and cruise. During warm-up I still believe it's in...
Forum: Performance & Maintenance 03-27-16, 07:51 PM
Replies: 35
Views: 1,269
Posted By fried_rice
Yes, the stock tuned ECU's like the Gforce,...

Yes, the stock tuned ECU's like the Gforce, mines, amuse, etc will eliminate the lean spot. That allows the best of both world's. You can keep the stock O2 sensor and use the wideband which will help...
Forum: Performance & Maintenance 03-27-16, 07:13 PM
Replies: 35
Views: 1,269
Posted By fried_rice
I always unplug the stock O2 sensors. I can't...

I always unplug the stock O2 sensors. I can't remember exactly, been a while since I logged closed loop/open loop, and stock ECU parameters, but I believe the ECU will always be in closed under 3kish...
Forum: Performance & Maintenance 03-27-16, 09:39 AM
Replies: 35
Views: 1,269
Posted By fried_rice
Gotcha, I was reading and typing quickly, see you...

Gotcha, I was reading and typing quickly, see you said "Auto ECU" I'll try to get some time to pull the hard-drives tonight after work. The base-map included with the MAP-Cal may be closer to the...
Forum: Performance & Maintenance 03-27-16, 08:45 AM
Replies: 35
Views: 1,269
Posted By fried_rice
Also on another note, any of the GTE ECU's will...

Also on another note, any of the GTE ECU's will be fine to tune; 1JZ/2JZ OBD1/OBD2 JDM, USDM, GForce, etc, I've tuned them all. You will be limited to your transmission if you're sticking with the...
Forum: Performance & Maintenance 03-27-16, 08:30 AM
Replies: 35
Views: 1,269
Posted By fried_rice
The 850's should be fine on the JDM 440's and the...

The 850's should be fine on the JDM 440's and the 1300's should also be fine on the tuned ECU. With the increased rev-limit you will hit a brick wall above 6,000 RPM unless you upgrade cams, that...
Forum: Performance & Maintenance 03-26-16, 10:16 AM
Replies: 35
Views: 1,269
Posted By fried_rice
With piggybacks, you can only run about double...

With piggybacks, you can only run about double the injector size. So if the 1JZ came with 440's you can run 850's on pump gas. E85 takes 30% more fuel, so you can run 30% bigger injectors.
...
Forum: Performance & Maintenance 03-26-16, 08:16 AM
Replies: 35
Views: 1,269
Posted By fried_rice
The MS3x has base maps as well as simple wiring...

The MS3x has base maps as well as simple wiring that can use the stock crank and cam sensors. I know a lot of tuners won't touch piggybacks or anything other than the highest end stuff.:sad: ...
Forum: Performance & Maintenance 03-26-16, 07:45 AM
Replies: 35
Views: 1,269
Posted By fried_rice
I made 700RWHP on a MAP-ECU-1 over 10 years ago....

I made 700RWHP on a MAP-ECU-1 over 10 years ago. The MAP-ECU-3 has a lot of cool features, is easy to tune and will support 1000cc injectors on E85. I've tuned quite a few cars with this setup, runs...
Forum: Build Threads 03-10-16, 08:41 AM
Replies: 23
Views: 3,015
Posted By fried_rice
^ Megasquirt MS3x, with a tablet mounted inside...

^ Megasquirt MS3x, with a tablet mounted inside for all gauge monitoring.
Forum: Build Threads 02-29-16, 08:05 AM
Replies: 23
Views: 3,015
Posted By fried_rice
Right now the project is on hold for a few weeks,...

Right now the project is on hold for a few weeks, and another one is in the works. The engine is bone stock minus the FFIM. Also all the maintenance stuff was done, FMS, Timing belt, water pump, etc....
Forum: Build Threads 02-28-16, 03:06 PM
Replies: 68
Views: 5,183
Posted By fried_rice
Awesome, Glad you got it sorted out. I ohmed both...

Awesome, Glad you got it sorted out. I ohmed both knock sensors of a previous SC which came back fine. That's one of the cars I re-did the wiring and still had the code sporadically.

I ended up...
Forum: Build Threads 02-22-16, 06:38 PM
Replies: 68
Views: 5,183
Posted By fried_rice
From reading the wiring diagram it shows the...

From reading the wiring diagram it shows the knock sensor grounded to the engine block. After wiring newer GTE's and standalones all sensor grounds run through the ECU, to ensure all sensors have a...
Forum: Performance & Maintenance 02-22-16, 06:06 PM
Replies: 4
Views: 302
Posted By fried_rice
Best way to get the fuel filter off when stuck,...

Best way to get the fuel filter off when stuck, is to leave it bolted to the chasis and buy a flare wrench. If that doesn't work Vise grips have yet to fail me. If it's super rusted you can buy a...
Forum: Build Threads 02-21-16, 11:45 AM
Replies: 68
Views: 5,183
Posted By fried_rice
Knock sensor wiring will definitely throw a code...

Knock sensor wiring will definitely throw a code and reduce timing from the 20 range down to 12ish, from what I logged when one of mine was bad. The shielding only runs, like you said, to about 5"...
Forum: Performance & Maintenance 02-21-16, 07:35 AM
Replies: 4
Views: 302
Posted By fried_rice
Yes, I ran a single stock line with a 485, Bosch...

Yes, I ran a single stock line with a 485, Bosch 1000's and a made about 600RWHP before blowing a W58 to hell. Another buddy made 676RWHP with a single stock MKIII Supra fuel line (smaller than the...
Showing results 1 to 25 of 453

 
Forum Jump

All times are GMT -7. The time now is 09:47 AM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved