RanGer498

Purchased this new hoping that i was going to get a sc430 but i ended up have to go with something that had a little more room

any ways the unit is new never used im asking what i paid for it $180.00 and shipping is free.

installation tips can be seen here.
https://www.clublexus.com/forums/sho...d.php?t=233967


i paid $220.00 total shipped from ebay (you can check it out)


info on the unit:
2001 02 03 04 05 06 2007 BackUp camera on nav PLUG&PLAY

The NavTool video converter unit will allow you to add video sources to your factory navigation system or color screen. The NavTool converter comes with a vechile specific harness that eliminates the need for cutting or making any kind of modification to your factory setup. The harnesses are made using factory connectors to insure 100% compatibility and reliability. NavTool converter comes with two video inputs one dedicated to a backup camera. The input dedicated to the backup camera has a positive trigger that will allow the back-up camera to be displayed anytime it’s activated with a reverse signal. The unit comes with easy to understand instructions, especially tailored to your specific vechile. Our product is backed with a no questions asked 12 month warranty. This unit is just a converter and will require a DVD player, back up camera, PS2, XBOX, or other sources. The unit is made using the highest quality material and comes in a metal case to prevent any kind video noise. The unit uses a video chip instead of relays like similar models. A relay is a moving part which adds to its unreliability while the chip is a solid state relay that has no moving parts. When using this product please BE AWARE that watching moving images on the screen visible by the driver of the vechile is illegal and could lead to a citation, death, accident, please obey local laws and don’t watch tv while you drive. Below are the specifications on the NavTool unit:



Features:

Built in color bar
Input auto detection
Digital conversion from input TV signals of NTSC, N4, PAL, PAL M, PAL N, SECAM, to output signals of NTSC-60Hz, PAL-50Hz
Digital line (525 ~ 625 lines) and field (60 ~ 50 field) conversion
6 M bit field memory
Built in 12V DC to DC inverter, ideal for use in car application.

Specifications:

Input Systems: NTSC, N4, PAL, PAL M, PAL N, SECAM
Video Input: 1 Vp-p 75 ohm RCA terminal
RGBS Output: RGB 0.7 Vp-p, SYNC: H+V 0.3 Vp-p 9 pin D terminal
Output TV Systems: NTSC - 60Hz, or PAL 50-Hz (through switch setting on PCB)
Sampling frequency: Y (13.5 MHz), R-Y (6.75 MHz), B-Y (6.75 MHz)
Digital code bit: R (8 bits), G (8 bits), B (8 bits)
Line: 525 ~ 625
Field: 60 ~ 50
Power: DC 12V 300mA power wires

RanGer498

i asked the company ( click here for link to there site and same item )if this will work with a gs400 navigation unit from 98 and up and this is what they told me

"Hi

yes it will work but you will have to cut 4 wires and conect wires from my unit to them

Thank you"

RanGer498

sold