mrblister

I need some help. Does anyone have the instructions for the most recent sense o shock alarm installation. I have asked steve at luxlink and he is unable to find them. I have the model of sense o shock that has two adjusments on the face of the black plastic module. This version was made for the most recent luxlink remote top remote start
that luxury motor works made. The black module has a 4 pin connector that plugs into the luxlink main control. There is also a six pin connector [ with just 5 wires connected ] that plugs into the luxlink main control. the five wires are brown, blue,green,white and orange [ the green, blue, and white wires have 15 amp in line blade fuses on them . I have no idea where they go. I believe that some of the wires must go to lights that will blink in an alarm condition [ 3 are 15 amp fused lines ] i believe one must go to a horn for a warn away in the event alarm is triggered by impact of glass etc. I would appreciate any input if anyone has installed this alone with there luxlink unit. my car is a 2005 sc430

Buddy
mrblister@earthlink.net

tonydt1g3r

i have the sensor but it was just an extra plug into the main unit