Where to buy Maya wheels?
#33
Lexus Champion
#34
The g35 350 forums are a very good place to look. They love maya rims and larger jdm rims. Another place someone might want to consider when looking for these is ebay honestly. I was able to get some 19x10.5 19x9.5 for a good price for one of my other cars. I always see atleast a couple ones up there even though most are euro fitment lambo, porsche, and so on.
#36
Lexus Fanatic
19x9.5 +24 and 19x10.5+22. I will post how fitment will be soon I hope.
#37
Lexus Champion
Join Date: Feb 2001
Location: CLUBLEXUS USA
Posts: 3,736
Likes: 0
Received 0 Likes
on
0 Posts
Nice wheels, but your fitment of your rims on your SC is more aggressive now than what your getting? In any event, your car looks sick !
#38
I'm wondering if this offset worked out ok?
I also plan to keep it pretty much near stock level (the body of the car to the ground). Except I will be using 20s instead of 19s.
#39
Mayas on my SC
These are my Mayas. They are 20's with 9's on the front and 11's on the back. No scraping or rubbing at all. I was told the wheels were designed for the SC-I believe it. I bought them from a CL member (Dan) for $1500 with new tires. He gave me a bargain. Sold my original wheels for $700. Not a bad upgrade for $800! GL with your search
#40
Moderator
Thread Starter
These are my Mayas. They are 20's with 9's on the front and 11's on the back. No scraping or rubbing at all. I was told the wheels were designed for the SC-I believe it. I bought them from a CL member (Dan) for $1500 with new tires. He gave me a bargain. Sold my original wheels for $700. Not a bad upgrade for $800! GL with your search
#42
Moderator
Thread Starter
i looked at many, many wheels before i decided on the works. for my personal taste, they're the perfect wheel. at first, i thought i wanted a 5-spoke design. but the more i looked at them, the more i thought they didn't quite look right on our car. i think they look better on more aggressive designs. or SCs with aggressive body kits. to my eye, a full-faced wheel looks more elegant.
part of the decision also had to do with brakes. i decided that if i got an open face wheel, i would need to get a BBK. i took a look at my stock brakes and rusted rotors and unfinished, grey calipers weren't going to cut it. so that would have added a pretty significant cost.
my only worry is that my wheels are out of production now. so if i ever damage one beyond repair, i'll probably have to buy a complete set of something else. it would be next to impossible to find a used one in the correct size.
part of the decision also had to do with brakes. i decided that if i got an open face wheel, i would need to get a BBK. i took a look at my stock brakes and rusted rotors and unfinished, grey calipers weren't going to cut it. so that would have added a pretty significant cost.
my only worry is that my wheels are out of production now. so if i ever damage one beyond repair, i'll probably have to buy a complete set of something else. it would be next to impossible to find a used one in the correct size.
Thread
Thread Starter
Forum
Replies
Last Post
King700se
SC- 1st Gen (1992-2000)
6
01-29-15 07:03 AM